**** got it wrong. Need some one too tips me about where too buy engine parts too a 1956 chevrolet 235 blueflame. I need neerly everything innside . Sent fra min GT-I9300 via Tapatalk
Hi & welcome. The engine in my avatar here is a 1957 235 bored 0.060 with a 264 grind cam, hardened valve seats and everything new inside except the crank & it was ground. Has Clifford water heated dual intake with 2 two barrel Webber Carb's & Clifford dual shorty headers. These special headers were needed due to the oversize of the water heated intake would not allow clearance for other brands such as the Fenton headers. Also added Langdon converted HEI distributor & coil. Two good places to start for parts on that engine are - Langdons Stovebolt 6 at langdonsstovebolt.com & email at info@landonsstovebolt.com http://www.cliffordperformance.net/ email is mailto: larry@cliffordperformance.net I have also uses Patrick's & they have good stuff but they are slower than sin. www.patricksantiquecars.com or email patskrks@aol.com Good luck on the build and post the build on the HAMB. Jimmie
The Jalopy Journal
