1952-59 Ford Bolt on motor mounts for 460 in a '56

This is probably on of those topics covered a zillion times, that I never paid attention to because it didn't have anything to do with my build. I did go thru the FAQ stick, couldn't find anything. A '57 forum member is helping a friend install a 460 in a '56 fairlane g***er. They would like to use bolt on motor mounts to the original oem crossmember. Is there such an animal? and if so, who/where?
Thanks

 

A friend used a modified Lincoln mounts. I thought Fox Mustang mounts would work since Fox SBF mounts work.

 

I have a set I bought from Crites, I just today decided I'm going to put a sbf in it I'll sell them 127$ unused

 

The fox 1984-93 mounts will also work for the 400M http://www.hotrod.com/how-to/engine/hrdp-0702-ford-400m-engine-build/ or https://www.fordmuscle.com/archives/2008/06/400MockUp/

 

More fun stuff: http://www.projectbronco.com/Technical_Articles/351m400_performance_build_up.htm

 

To specify, the Fox 429/460 mounts will work, not the 5.0 mounts

 

I p***ed a link to this thread to the '57forum member, but you may want to pm me your contact info. I'll p*** it on to them in a pm also.
Just to verify, yours are for a 460 in a '56 and are bolt on?

For my own curiosity, Jeff...the 400M articles you posted a link to...the 400m is same block as 460?

 

No it is 100% like the 429-460 It is similar to the Cleveland and can even use Cleveland heads.But it does according to the Hot Rod link share bell housings and transmissions with the 429-460.

 

Speedway has added to the line of swap mounts available http://www.speedwaymotors.com/Search?query=Ford+motor+mounts Notice they have both the 429-460 mounts and the 400M also.

 

Call Crites in Asheville Ohio, they had mine to my for in 1 week 127$ shipped.