I can't figure out how to load images on the page anymore,so email me and I will email them to you. Cab and front fenders pretty solid,hood needs a patch panel,and the rear fenders are rough,but fixable. Truck is painted with gray primer,and surface rust is starting to show from it sitting outside for a few months. Top chop is probably 95+ percent complete. Garnish needs to be cut to size. Cab needs a patch panel at the bottom rear,but is otherwise solid with only surface rust. One door has a finished patch panel at the bottom,and the other door has a unfiniished patch panel at the bottom. I have a patch piece from another hood that goes with the truck. Floors are solid,so is the uncut firewall. The sheet metal was painted with gray primer,and surface rust is starting to show from it being stored outside for a few months. It will need to be sanded down and primed again. It will all fit into the bed of a standard full-sized pu,and I have a loader to load it in your truck or on your trailer. Will take flathead 6 Ford or flathead 6 Mopar speed equipment in full or partial trade. Will take some 51 Ford coupe or 42 Dodge coupe sheet metal or trim parts in full or partial trade.
The Jalopy Journal
