Register now to get rid of these ads!

1932 Ford 5 window coupe project.

Discussion in 'Parts For Sale' started by docauto, May 8, 2016.

  1. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

    City: socal

    State: California
    Price: 10000
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Hi guys and gals. Here's an affordable 32 coupe project, but you better be able to weld! It's a real pile (a couple big piles) of 32 Ford 5-window coupe. There's about 1 1/2 bodies worth of sheetmetal and a nice straight numbered gennie frame with good K member and cross members (with a really nice front spreader bar!). Super nice firewall. no grill or hood. I'm moving the shop, so get it while you can! I have lots of other parts (dropped front axles, quick change rears, radical flathead speed equipment etc.) at extra cost available with this project only. I've been holding this for years and dug it out for the move, so act fast. Feel free to PM to set up an inspection and look thru the pile! Thanks Dave
     
    haring and patrick english like this.
  2. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

    Bumpit. Lots of interest, but no buyer yet. Come and look!

    Sent from my SM-G935V using H.A.M.B. mobile app
     
  3. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

    Bumpit. Come on guys, I'm not going to ship it to you so you can inspect it first, don't be silly.... lots of other cool parts available with purchase.

    Sent from my SM-G935V using H.A.M.B. mobile app
     
  4. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

    ok ok ok..... for all those who have asked, here's a step by step of all the pieces included in the 32 coupe body and numbered frame.Note how there is plenty of overlap between the body sections. The last few pictures show ADDITIONAL pieces that are included with the body. The worst area is the rear floor (I would get a new section from Brookville, easier) and the right door. There are additional door pieces and a spare tudor door to rob pieces from. All in all a relatively straight forward build.

    $10k for everything shown, and I can supply at additional cost front and rear ends (including quick change), motors (ranging from flatty to hemi), trans (39 Ford to Muncie), exotic flatty speed equipment and TONS of other stuff with this body only (not selling parts alone).

    Have a close look and feel free to PM for any additional information or to set up an inspection.

    For you overseas folks: I can deliver to the shipper of your choice (locally of course).

    Thanks Dave







    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  5. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

    Bumpit! Had some interesting offers, i will consider partial trades, i like early motorcycles, 36 ford stuff, whatever. Thanks!

    Sent from my SM-G935V using H.A.M.B. mobile app
     
  6. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

  7. docauto
    Joined: Dec 1, 2006
    Posts: 789

    docauto
    Member
    from So Cal

    Sold a model A instead, so this one is back up for sale! Offers or trades ok.

    Sent from my SM-G935V using The H.A.M.B. mobile app
     
    too many fords likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.