Register now to get rid of these ads!

rev jake got his car home

Discussion in 'The Hokey Ass Message Board' started by bulletproof1, Mar 18, 2006.

  1. bulletproof1
    Joined: Feb 23, 2004
    Posts: 2,079

    bulletproof1
    Member
    from tulsa okla

    this morning rev, vern and myself went and got his delray out of storage,as you can see it has been setting for awhile...after we got it home and unloaded we just had to see if it would fire off.with a battery and some new cables we got it to turn over..the carb was so rusted up that the butterflys wouldnt open .with alittle starting fluid down a port on the intake it fired.it only ran for a few seconds ,but that was enough...when i left he and vern where on there way to get tune-up stuff and a new carb from phil.. stay tuned ,we are going to have this thing on the road for the straykatt 500.
     
  2. dv8
    Joined: Apr 15, 2001
    Posts: 1,097

    dv8
    Member

    Right on! He told me he was fired up about tearing into the car and getting it roadworthy. have fun guys!
     
  3. bulletproof1
    Joined: Feb 23, 2004
    Posts: 2,079

    bulletproof1
    Member
    from tulsa okla

    benn trying to get the pics loaded ..will show them as soon as i can....
     
  4. bulletproof1
    Joined: Feb 23, 2004
    Posts: 2,079

    bulletproof1
    Member
    from tulsa okla

    ill see if this works,bare with me
     

    Attached Files:

  5. Thanx Bulletproof for posting the pics. We just got back from Phil's shop. He gave me a reman'd carb off of a motor he pulled out of his fleetline.

    I hope to fire off the "new" carb tomorrow.

    You never know DV8, I may drive IT to Tampa next year!

    Reverend Jake
     
  6. CURIOUS RASH
    Joined: Jun 2, 2002
    Posts: 9,635

    CURIOUS RASH
    Classified's Moderator


    If that carb is a Carter WA-1, I have two of them. They're yours but will probably need a kit.


    Glad you got it home, homey.
     
  7. Thanx Rashy. The one I pulled off of the car is a Rochester, but I'll look at watcha got.

    Reverend Jake
     
  8. dv8
    Joined: Apr 15, 2001
    Posts: 1,097

    dv8
    Member

    REV...we never really talked about your plans for it other than getting it on the road. What all are you planning to do to it?
     
  9. I'm gonna build this one as a simple mild kustom. Something similar to Myer's 57 Ford.

    I've always wanted "the" DeSoto grille. And of course it will have a gold tooth. I want a different front bumper, but I'm not sure what one.

    There isn't much in plans of color yet, because I want to focus on drivability first. Once I have it starting consistantly I will put my Superior dropped spindle disc brake kit on it to take care of the WHOA's after it GO's.

    It needs patches for the headight areas and quarter patches too. I'll focus there after that.

    I'm stoked!

    Reverend Jake
     
  10. bulletproof1
    Joined: Feb 23, 2004
    Posts: 2,079

    bulletproof1
    Member
    from tulsa okla

    im just glad you finally have something we can work on,
     
  11. Vern
    Joined: Dec 2, 2004
    Posts: 168

    Vern
    Member

    Iam ready to do it!!
     
  12. Looks like a good project, Can't wait to see it in person.
    TZ
     
  13. straykatkustoms
    Joined: Oct 30, 2001
    Posts: 25,647

    straykatkustoms
    ALLIANCE MEMBER

    Kongrats Rev!!!

    The '58 is a factory built kustom right off of the show room floor. I love
    seeing them cleaned up and made into a mild kustom. I saw a pale yellow
    wagon with white scallops real kool and tasteful. All you have to do is lower
    it & drive the wheels off of it.

    Let me know if I can help.

    Happy Trails,

    Mick
     
  14. Whitey
    Joined: May 11, 2005
    Posts: 242

    Whitey
    Member
    from T-Town

    Dude thats sweet! I'm glad to see you got her home.
    Can't wait to see her on the road!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.