Register now to get rid of these ads!

51 Packard Wiring harness...

Discussion in 'The Hokey Ass Message Board' started by Greazzy13, Mar 28, 2006.

  1. Greazzy13
    Joined: Oct 10, 2005
    Posts: 73

    Greazzy13
    Member

    Point me in the right direction. I'm gonna keep the 6 volt system and update the wiring. Harnesses(ssss) or products?
     
  2. oljoe
    Joined: Mar 11, 2006
    Posts: 26

    oljoe
    Member

    I got a 50 and have to tell ya they are kinda odd when it comes to electric.Mine is all stock,so hard to say unless you are in the same boat. If so you might check out Kanter autoat www.kanter.com. hope this helps.

    Oljoe
     
  3. Check out Rhode Island Wiring at www.riwire.com or call 401-789-1955. I only have the Foreign vehicle catalog. I've used several on Healey's and Jag's. It's as good as a factory replacement on them. I know they have a pretty full American line also in Origional replacement. No Hot Rod stuff.
    The Wizzard
     
  4. KATFISH
    Joined: Aug 9, 2004
    Posts: 662

    KATFISH
    Member

    Call YnZ yesterdays parts

    (909) 798-1498
     
  5. Agentx66x
    Joined: Nov 18, 2004
    Posts: 65

    Agentx66x
    Member

    I was lookin around for a few months for my 50 (2301) for a Orig replacement. Everything I came across was $800-$900. I went down to so-cal and got the haywire 7 circut for under $200. It did the job but there are better ones out there. Just keep reasearching. Packardclub.org has a electrical diagram that you can print out. It helped a lot when redoing the wiring.



    Ryan
     
  6. Agentx66x
    Joined: Nov 18, 2004
    Posts: 65

    Agentx66x
    Member

    Any Pics???
    Its good to hear that more packards are on the road.....
     
  7. Greazzy13
    Joined: Oct 10, 2005
    Posts: 73

    Greazzy13
    Member

  8. Greazzy13
    Joined: Oct 10, 2005
    Posts: 73

    Greazzy13
    Member

    The fellaz that owned it prior, put like $10k into it (rechroming, polishing the stainless, motor/tranny rebuild, bodywork, etc...) and had all the parts sorted and ready to go. The somehow had a falling out before they put it all togeather and I snagged this thing for (git ready) $500 smack-a-roos. The only thing I gotta do is track down a dash panel, wire it, and piece it togeather...so if anyone knows someone with a dash fer sale...lemme know. Thanks guys.
     
  9. orcas tow
    Joined: Nov 23, 2004
    Posts: 282

    orcas tow
    Member

    I have used the Rhode Island Wiring as piston broke mentioned, expensive but the harnesses we have bought from them (3) have laid in place perfectly every time, I mean perfect to a fault, wonder how they do that?
     
  10. flatheadpete
    Joined: Oct 29, 2003
    Posts: 10,624

    flatheadpete
    Member
    from Burton, MI

    That custom hood-holder-downer kicks ass!
     
  11. Gr8ballsofir
    Joined: Apr 21, 2001
    Posts: 768

    Gr8ballsofir
    Member

    Kanter specializes in Packard...
     
  12. oljoe
    Joined: Mar 11, 2006
    Posts: 26

    oljoe
    Member

    anyone have ideas how to make a 50 4dr sedan inta a kustom? have taken pics.and cut them & moved them around, made drawings and did the same, and it just seems to be a turd! So far it seems I'll leave the body stock shave the uglies where I can and run it. Pics. of others would be great
     
  13. BrandonB
    Joined: Feb 24, 2006
    Posts: 3,535

    BrandonB
    ALLIANCE MEMBER
    from nor cal


    Try www.kanter.com tell them what you have are looking for and if they don't have it they can probably point you in the right direction. They have a section in their catalogue that is Packard only. Somewhat pricey though. Good luck.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.