I have a 1959 f100 1/2 ton pickup. I want to put in my 1955 Chevrolet 265 v8 engine ft mount block Looking for info on "bolt in" Kits for this application. Thanks so much for Any Help!
Sell the 265 to a restorer and put a Ford in it. You can buy a motor mount kit and install a 302 over the weekend. At least put a side mount block in they make kits for that. I put a 350 in a 64 F100 with a turbo 400 . Easy swap with trans -dapt parts.
im doing a sbc in a 57 now... using a round type drop front mount..im welding it in too make it a crossmember... I cut the mid crossmember out so I welded a piece of 2x3 above the ******...use 1/8 channel for a trans crossmember..put it on top of rail, that will give you a good engine height...put 2x3 and 1/4 under the front mount that will have angle close. may have header problem wt steering box....try model a headers
The Jalopy Journal
