I've heard of people mounting mustang radiators vertically to fit behind deuce grille shells. What year(or years)of mustangs do you use? Will it work with a 30-31 A shell? I will be running a 327 SBC. Don't feel like spending $400-$600 for a Walker/BeCool, thanks.
I just got one from a 65-66 for mine but im using it in a 36 truck shell w/327 I had to have the upper inlet moved from right side to left its a 3 row and was about 130.00 from Adanced auto parts its 18 1/2" Wide 22 1/2" tall I think if you get one for a 6banger the inlet is already on the left but im not sure on that hope that helps
Here's how I did mine. In an A shell. http://www.jalopyjournal.com/forum/showthread.php?t=92923&&showall=1
Wll doesn't that kick a little ***, thank you very much for the info fellas, that's what I'll be doing for my cooling system.
A friend of mine has a '65 'Stang rad in a T shell, but had to extend it a few inches. I just built a '73 Dart rad up to fit in a '29 A shell for my flattie. Lots of spare metal frame to mount the shell. Flatman
I built a frame from J-channel to hold rad and then shell attaches to that. see pics at http://www.ncf.ca/~da229/pics/rad-mine1-smaller.jpg http://www.ncf.ca/~da229/pics/rad-mine2-smaller.jpg http://www.ncf.ca/~da229/pics/rad-mine3-smaller.jpg http://www.ncf.ca/~da229/pics/rad-mine4-smaller.jpg http://www.ncf.ca/~da229/pics/rad-mine5-smaller.jpg Not installed in car yet
The Jalopy Journal
