Register now to get rid of these ads!

rebuilding after the crash

Discussion in 'Off Topic Hot Rods & Customs' started by racer-x, Sep 19, 2015.

  1. kabinenroller
    Joined: Jan 26, 2012
    Posts: 1,289

    kabinenroller
    Member

    So tomorrow if I hear "thunder" or feel the ground tremble under my shop I will know you got it on the road.
    Jim
     
    els, OahuEli, zbuickman and 2 others like this.
  2. Budget36
    Joined: Nov 29, 2014
    Posts: 15,020

    Budget36
    Member


    Heck, I'm in Ca., will wait for the earthquake.
     
    els, OahuEli, loudbang and 2 others like this.
  3. Jim if all goes well on the test drive i might stop by and give you a ride. Im curious about the zoomies on how loud they will be and how they sound.
     
    els and loudbang like this.
  4. kabinenroller
    Joined: Jan 26, 2012
    Posts: 1,289

    kabinenroller
    Member

    Brian,
    I will be "South of the Border" at a cars & coffee event until about 1pm. If you are out and about in the afternoon cruise by and piss off my neighbors with the zoomies!
     
    els, kidcampbell71 and loudbang like this.
  5. Mission accomplished its running. This is the first time its been outside this year. The start up went smooth. We did it on gas today. My buddy mark is on the way over so we can set the pinion angle and pre load on the four link. Weather permitting i will be out disturbing the peace tomorrow. Later in the week i will convert it over to nitro for some on track action. Squirell posted a video on the meltdown site for me of the first fire up. 20170625_190653.jpg
     
    els, OahuEli, kiwijeff and 13 others like this.
  6. squirrel
    Joined: Sep 23, 2004
    Posts: 59,169

    squirrel
    Member

    here it is again...

     
    els, cactus1, Poh and 15 others like this.
  7. Mark stopped by as planned. The chassis is now set up to race. I need to do about a hours work on it monday then go cruisin.
     
    els, loudbang, wicarnut and 1 other person like this.
  8. Budget36
    Joined: Nov 29, 2014
    Posts: 15,020

    Budget36
    Member

    Too loud, you Hoodlum:)

    Will/can the idle be smoothed out, or is that the nature of the beast?

    Either way, I'm thinking just hit the pedal and hang on!
     
    els and loudbang like this.
  9. squirrel
    Joined: Sep 23, 2004
    Posts: 59,169

    squirrel
    Member

    heh...that's a nice mellow idle.
     
    els, loudbang and David Gersic like this.
  10. Stogy
    Joined: Feb 10, 2007
    Posts: 26,905

    Stogy
    ALLIANCE MEMBER

    Monster Cool...That is one Nasty Chrysler.
     
    els and loudbang like this.
  11. The idle will smooth out when the engine temp comes up. The fuel map is sending alot more fuel into the engine because its cold. Its like having the choke on. With efi a blown car wont get the surging up and down idle that carburated cars are prone to have. My car likes 1150 rpm in neutral and 1000 rpm in gear.
     
    els, kiwijeff, loudbang and 3 others like this.
  12. texas red dodge
    Joined: Feb 11, 2015
    Posts: 11

    texas red dodge

    I love it MOPAR TO YA !!!!!
     
    els, loudbang and racer-x like this.
  13. Saw the video on Jim's Facebook page, sounds really healthy. Happy cruising Brian.
     
    els, loudbang and racer-x like this.
  14. The first road trip went well. The expansion tank that was added over the off season worked great. I was having trouble keeping it cool. I explained the situation to the guys at mezziere water pumps while at pri last year. They looked at my pics of the system and told me to add the tank. It has to be mounted higher than the radiator. It has lines going to both the hot and cold side. It removes the air in the system allowing it to make pressure. The way the radiator was mounted on a angle it always had air trapped in it. It works so well now i could drive with one fan on getting no hotter than 185 degrees.
    Due to limited space in the trunk its mounted inside behind the passenger seat. Two number 6 lines run to it. Its info like this that i get from the manufacturers at pri that make that trade show so great. I was able to drive the car out to union grove and back. Its about a 50 mile round trip. 20170626_155141.jpg 20170626_164440.jpg
     
    els, kiwijeff, kidcampbell71 and 7 others like this.
  15. 1949 caddyman
    Joined: Jun 30, 2010
    Posts: 225

    1949 caddyman
    Member
    from arizona

    How was the noise from the headers, too loud?
     
    els and loudbang like this.

  16. HUH ??? :cool:
     
    els, OahuEli, kiwijeff and 3 others like this.
  17. Huh? Is right. I drove it one way without ear plugs. I drove it back with them in. Its loud for sure. Going down the road i could see people out in their yards about a quarter mile way looking to see what was coming down the road. The look on their faces had me laughing the whole time. My neighbor at the end of the block heard it start up sunday. He is a half mile away. Its not bad at all with ear plugs. Its better than the side pipes were. It sounds better to.
     
    els, cactus1, OahuEli and 9 others like this.
  18. Runnin shine
    Joined: Apr 12, 2013
    Posts: 3,383

    Runnin shine
    Member

    What percent more would you guesstimate it is when on nitro? Say with the muffled zoomies? 50%?
    I assume double with the non-baffles?


    Sent from my iPhone using H.A.M.B.
     
    els and loudbang like this.
  19. Open headers and nitro is so loud you cant really hear any louder. The sound level is maxxed out. After the fun leisurely cruise today its time now to do some schedualled maintainance and inspecting. Before anyone says wtf you just got it together remember i got 50 or so miles on it today. Im used to working on the dragster were we only get 1/4 mile out of it before the heads come off. This time around i will leave the pan on because the filter looked good. With this kind of power level and the cost of these parts i have no problem taking a peek inside. open up and say ahhh for me. Its cheap insurance. 20170626_205449.jpg
     
    Last edited: Jun 26, 2017
    els, OahuEli, kiwijeff and 6 others like this.
  20. squirrel
    Joined: Sep 23, 2004
    Posts: 59,169

    squirrel
    Member

    loud pipes save lives
     
    els, kiwijeff, kidcampbell71 and 3 others like this.
  21. Is the radiator shell/grill ever going to make a reappearance, or is it gone for good? A cut away fiberglass painted-on-grill version would really add to the 'funny car' vibe....
     
    els and loudbang like this.
  22. saltflats
    Joined: Aug 14, 2007
    Posts: 13,219

    saltflats
    Member
    from Missouri

    So did the pattern on the pistons look good?
     
    els and loudbang like this.
  23. Stogy
    Joined: Feb 10, 2007
    Posts: 26,905

    Stogy
    ALLIANCE MEMBER

    Mmmmm...real steel...;)
     
  24. loudbang
    Joined: Jul 23, 2013
    Posts: 40,342

    loudbang
    Member

    The rebuilt tank bracket fits right in. It doesn't jump out at you, you have to be looking for it to pick it out.
     
    els, mad mikey and racer-x like this.
  25. i originally wanted the grille up front to help it keep its Chrysler identity. as things became more complicated up front it became clear it would not fit anymore. its now a wall hanger. so far everything looks good.
     
  26. enloe
    Joined: May 10, 2006
    Posts: 9,981

    enloe
    Member
    from east , tn.

    I will be looking forward to seeing this beast run at the Meltdowns
     
    els, loudbang, David Gersic and 2 others like this.
  27. Very cool news to pass on. I have been holding on to this news for a couple of weeks now. I had to keep it under wraps until a official announcement was made. The week before the start of the dream cruise in detroit this year a select group of cars were invited to race on the most famous road in america that being woodward avenue. My car and i were invited to mix it up with a few of the countries fastest street cars for the roadkill nights detroit. To be invited into this limited group is a big deal. Nitro street racing on woodward how much better could it get?there are a few other big announcements coming soon.
     
    els, mgtstumpy, OahuEli and 11 others like this.
  28. David Gersic
    Joined: Feb 15, 2015
    Posts: 2,802

    David Gersic
    Member
    from DeKalb, IL

    Cool news!


    Sent from my iPad using H.A.M.B.
     
    els and loudbang like this.
  29. David Gersic
    Joined: Feb 15, 2015
    Posts: 2,802

    David Gersic
    Member
    from DeKalb, IL

    I got to see and hear this beast run briefly at Meltdown last year. That *is* smoothed out and mellow comparatively.



    Sent from my iPad using The H.A.M.B. mobile app
     
    els and loudbang like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.