Register now to get rid of these ads!

1952-59 Ford time to play..... what the heck is this?

Discussion in 'Off Topic Hot Rods & Customs' started by squire g, Jul 6, 2017.

  1. squire g
    Joined: May 2, 2017
    Posts: 123

    squire g
    Member

    IMG_0129.JPG IMG_0128.JPG the rules are simply. anyone who can identify the what the picture is wins some well earned bragging rights
    photo 1 shows a hose plugged with something we dont care about. the challenge is to identify the function of the ****** the hose is attached to. it is located on right side lower side of a 292 yblock just above the oil pan.
    photo 2 was taken beneath a 1956 country squire. it is located below the drivers door right between the frame rail and the rocker.

    thanks for playing
    what the heck is this
     
  2. 56FORD390
    Joined: May 11, 2015
    Posts: 770

    56FORD390
    Member

    Photo 1 - block drain for the cooling system
    Photo 2 - body or seat belt mount but it's off center (I'm guessing on this one)
     
  3. squire g
    Joined: May 2, 2017
    Posts: 123

    squire g
    Member

    so i could remove the hose and put a valve on the block drain?
     
  4. Mark T
    Joined: Feb 19, 2007
    Posts: 2,175

    Mark T
    Member

    Or a proper plug...
     
  5. 54sunliner
    Joined: Aug 6, 2013
    Posts: 193

    54sunliner
    Member

    Galley plugs? Hmmm?
     
  6. Texas57
    Joined: Oct 21, 2012
    Posts: 3,741

    Texas57
    Member

    I'm not familiar with 292s, but any chance it's a heater coolant hose disconnected for summer?? My old 6 had a shutoff valve on it's coolant hose.
     
  7. steveodeluxe
    Joined: May 1, 2013
    Posts: 188

    steveodeluxe
    Member

    Is the first picture a hose plugged with a condenser?
     
  8. Rui
    Joined: Sep 17, 2012
    Posts: 1,786

    Rui
    Member

    Either that or:
    1 - This upside down pic shows something plugged with a condenser about an inch above the oil pan, crankcase area... No water cooling there I guess. Might be something related to breathing / crank case ventilation / PCV blocked?
    2 - Aint go a clue what its for, but it is in the area where the rubber plug goes to remove water.
     
  9. 56longroof
    Joined: Aug 1, 2011
    Posts: 2,379

    56longroof
    Member

    The first one should have a pet**** in it. Should be one on each side. Have no idea on the second pic.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.