Technical 52 F1 bed details

Can anyone tell me the dimensions of the crossers that go between the frame and the wooden planks on a 52 F1? I have 2 that are about 1-1/4" in height. Looks like there should be 4 . I also need to know the order they go in. Taller ones to the cab? I got this box in pieces and some are missing so I do not have any reference. I do have the wood dimensions and bought new strips from Macs so just need this info and I can fabricate the missing pieces.

Thanks!

 

Nobody??

 

The 2 channel type pieces go forward and aft of the frame hump. The Z shaped one goes at the very front of the bed. The rear bed X member should have brackets that set on the ends of the frame rails.

 

I don't have the "Z" piece. That is what I need. pic and dimensions would help. I have the rear.

 

Anyone have a picture of the "Z" piece that goes next to the cab on a 52 F1, under the bed? I need to make one and don't have a pattern.

Thanks!

 

The Z piece is not really a Z. It has no angle.....it's a flat Z. I'll try to get some photos later and some measurements.....

 

No, not really Z shaped. only way I could think to describe it. Go here for a new one

http://www.horkeyswoodandparts.com/page29.php

 

Found a decent picture on Dennis Carpenter's site, under bed runners. Think I can figure it out from there!