1952-59 Ford 302 mounting brackets for single wire alternator

Can someone, please, post a picture of the installed alternator. I have the es1031c and jm9111c but cannot figure where or how this mounts.
Thanks in advance for help.

 

Should be something like this..

https://www.amazon.com/Top-Street-Performance-JM9111C-Alternator/dp/B00UL448JY

 

That is EXACTLY what I need. Thank you so VERY, very much.

 

Here are a couple of shots from my setup of the factory kit. Triangular shape bracket at top fastened to water pump, bolt on top of alternator to the cylinder head with a spacer, lower arm from water pump to bottom of alternator.

 

so, bottom line appears to be that the chrome bracket kit JM911C I bought does not fit and I will have to locate the stock brackets shown above in Auslander's pictures. Does anyone happen to have the two brackets that they would be willing to part with?

 

The video I sent you did not help ?

 

Why doesn't your bracket fit? If the alternator is hitting the upper control arm you can always rotate the alternator on the high side of the bracket and just make a new tensioner rod.

 

It is in. I got a nice chrome bracket from a local Ford guy. He did not need it, but I sure did.
Thank you all for your help.