Technical does anyone know how to add wipers to a 26 tudor model t

hey does anyone know where i can get a wiper kit for electric wipers or what parts to use to go on a 1926 ford tudor with modern v8

 

try google ing it if you cant find a kit you might be able to adapt a single wiper motor from speedway made for the a. just ideas

 

specialty window and wipers have a cable driven unit. kinda pricey tho

 

k ill look thx

 

After market Jeep stuff

 

I've got a Specialty Power cable wiper setup in my 48 and not much would show except the actual piece that the wiper arm fastened to. The motor can be hidden about anywhere you have room.
Back in the 70's a lot of guys used the motor, arm and blade for a Jeep CJ from the after market on tall T's and other similar rods. Simple setup and the switch is on the motor so there isn't a lot of wiring but you would never get two of them in sync. Something like this. Readily available from lots of sources https://www.amazon.com/Omix-Ada-19101-02-Wiper-Motor-Kit/dp/B000FQ7H28

 

New Port Engineering has a neet set that go up in the header and will work with your fold out windsheld www.newportwipers.com work good in my 26 .

 

awesome info thanks . can you tell me what your cowl measures from windshield to hood im scratch building a cowl and cant seem to find that measurement anywhere.

 

awesome thanks

 

ill check it out thanks

 

the jeep cj setup with wiper transmission and all looks retrofittable under the window or above

 

thanks guys

 

modern v8 ? ...... vacuum wipers will work fine... A and T w/s frames are similar...
think they mount outside the w/s frame...

 

modern v8= chevy smallblock im starting a build no complete car yet ill have the frame soon then go from there

 

Rain X works pretty good.

 

I've used a three wiper setup kind of homemade from the old Datsun/Nissan 4WD G60 model.
You can even find them with two wipers and I just make them into three as the coverage is much better.
I've used them on my 29 Tudor, 29 Pickup and now on a 26 Coupe.
I take my time and can get it all but the motor unit to fit inside the header panel.
I don't have actual pic's of the setup but here is what I could fine from my 29 red Tudor and 26 primed orange Coupe.
If you play your cards right you can end up with 2 speeds and washers if you so desire.
PM me if you want more info, I'd be pleased to help out.

 

thanks very helpfull

 

Anybody got pics of the Newport Eng. setup showing how it fits the header inside the car ( '30 A coupe ) ??
Interested on seing how the motor /linkages mount...
Thanks ,
Stan