1952-59 Ford AIR CLEANER

Hy guys!!!
I shall want to change my air filter of origin on my 6 cyl,I have a HOLLEY single bbl and I shall like to put this one, but how to be able to fix it / to adapt it ?
Thank you soo much for yours help

 

Dont know if youll find what you want easily Greaser. I built my own (https://www.jalopyjournal.com/forum...arrel-carb-air-cleaners.980990/#post-11062040)

If you dont wanna go this route, I say visit your machinist friend and have something made to suit.

 

You will have to fabricate an adapter the same way Rui did as far as I know there are none available over the counter and haven't been for several decades.

 

Would this work?

https://www.summitracing.com/parts/...QLQ4gH8cHg9F0--os40lom5bFHQDiJIYaAmE-EALw_wcB

 

Problem with that adapter is there is not anything to attach to the 1904's clamp fitting.

 

You have to fabricate something that will slip under the carbs clamp, as Jeff said.
Do you have the original oil bath cleaner? You can either chop off the needed part if you no longer want the oe cleaner (I kept mine), and make you adapter from there, or just mimic its shape and contour.
Then fire up your MIG and weld the thing on your new cleaner's base.