Hey guy's I did a search and I couldn't find anything on the internet or in the forums here. I'm looking for technical drawings with dimensions for both the 32 and 33 ford victoria's for a project I'm working on. I can find them for a 31 model A Victoria but not the 32 or 33. My thinking is from the B pillar back they are the same and from the B pillar forward it would be the same as a 32 and 33 sedans. Am I wrong in thinking this?
The '32 Victoria door is different than the tudor door, just in subtle areas, maybe less than 1/4" or so. But, if your doing 1/8 scale, the vicky door and sedan would look the same at that scale. Not sure about '33.
Yes I'm doing both the 32 and 33 victoria's in 1/8th scale. I have the sedan already and the artist doing the drawings can only find the 31 Victoria dimensions. I'm figuring from the B pillar back they look the same. Should work for a model.
I started to do one with a resin 5w, lengthen the door(move B pillar back), when it came to the belt line around the back I gave up.
I'm having them both 3D printed and then I'm going to cast them. I have done the 33 coupe and a 32 3 window and a 32 truck cab. I'm working on a 47 truck cab now.
Yeah that would be a bitch to do. The backs are completely different. Looks like you had a good start though. I just had both the 29 and 32 tudors printed and I will be offering them too. T
The Jalopy Journal
