Projects Couple of Oz of water down the carb...how to flush?

That is it, exactly. One end goes in the hole in the manifold the other to the carburetor.

 

Thanks Scott.
Weird i didnt see ur message...
Im trying to hook everything up before firing it again so i thought of hookong the choke as well...
I want to hook a radiator since it didnt come with one...next weeed i should have all the parts to try it again...
Thanks guys

 

Thank you

 

So now that i have the part....i see that all of my line is metal tubing and the one coming from the carb is copper...how do i connected all togethe???
Im sorry but i dont see another way but to solder???
Or do i use a piece of vacuum line?

 

There is a fitting that unscrews off the carburetor. The line goes on in one piece. Stick one end in the exhaust manifold, the other on the carb and tighten the fitting.

 

Uhhh, well....... Props! The only Q is= how bad did you panic?

 

I puckered a little bit...
Imagine a little ball of fire inside a van in front of your 8 year old son,and you have to hold back the tears and the urge to scream: "fuuuuuck" in front of him..
Eventually i beat the fire like it owed me money, with a towel and put it out...
I had a fire extinguisher 2 feet away...
No Heinekens we're harmed.

Ok,this seems to short but i will try thanks....

 

This has been an interesting thread. As usual, I've learned a few things along the way and once again I'm impressed with the HAMB community coming to the aid of another rodder in need. But I've got to say that I've been a bit surprised at the lack of good-natured ribbing or even a few Cheech and Chong jokes given the source water problem that was being discussed .....

 

I'm glad someone admires our self control. I was tempted to make a crack once or twice but what the hell, we all have to learn.