Technical Front Panhard Bar for AV8

I`ve got a stock Model A Ford front axle with split wishbones. I will be installing a Vega steering box with cross steering. I haven`t been able to find a company that makes a pan hard bar for this application. Most of them have one for a 4 bar suspension. Does anyone have information on fabricating one or where I can find one commercially? Thank you.

 

Mac's has one. It bolts to the frame on one side and spring shake on the other. Mac's Auto Parts.

 

Got a couple from Speedway several years back. Check their site.................

 

There’s a thread on here by a French guy building a European 32. Plenty of pictures of his front panhard bar. I copied it for my 27 using a Citroen 2CV trackrod and cut down steering arm.


Sent from my iPad using The H.A.M.B. mobile app

 

^^^^^^^^ is that how you get 20 years out of a pair of sneakers???? I like it!

 

Welder Series panhard bar kit on a Model A with split radius rods:


Pictures taken during install/fitting. Radius rod mount also included a mount for a steering damper below the panhard bar. Frame end mount was welded to a re-enforcement that was a mount for a bolt on shock mount.

Canuck

 

Thanks for the info guys. I`am getting a clearer picture of what I need to do to fabricate one.

 

I made one from an old tie rod. Fab'd brackets similar to Canuck 's image of Welder's Series stuff.

 

Pete and Jakes also has one for split bones.

 

I made one out of don tube with its length equal to the drag link length.


Sent from my iPhone using The H.A.M.B. mobile app