Technical Front springs model a

Looking for a better ride for my 31 ford .I have Qa1 shocks on the front using the original springs with my set up ,its still a very bumpy ride I was told if I remove one leaf it will give my shocks a opportunity to work like they are meant to ,big question is witch leaf to take out ? Or does it matter which leaf to take out.

 

I usually try to take out several leaves, you will need to make a spacer to take up the room in the crossmember so the u bolts will tighten up on the spring. While you have the spring apart you should bevel the ends of the spring on the bottom so they will slide better, I also put a light coat of grease between the leaves.

 

I bougth rev. Eye main springs from "A spring "in Hartford Ct. Polished and grease . I took out number 3 and 5 .

 

Thanks for the reply will give it a shot .

 

Thanks for the reply .

 

How many leaf are there in your spring,what motor and trans are in it,

 

Size tires and air pressure? Is your shock setup correct for the weight of your car?

 

More info please

 

This has been covered many times.