window felt staples

Anybody know where you can get the staples that hold the window felt to the interior trim piece on advance design chevy trucks. I remember seeing staples like this holding other parts on too. about 1/16 inch diameter and appear to be put in with a special tool. Or any other ideas on attaching the felts, I don't think adhesive would hold it, screws might work but they could sratch the gl***. thanks

Devin

 

im not familiar with yur application, but i used really, really small rivets. the felt was longer than the head so it worked good.it just takes two guys , one hold , the another rivet

 

I use stainless wire and bend my own

 

thanks, ill try both of them and use whichever works better for my app.

Devin

 

Drilled and countersunk for small "countersunk" pop rivits. Kept the rivet head way below the gl***.

Canuck

 

I used rivits for the channel that goes down the length of the vent window frame, and I used tiny flat top screws for the rest. That felt is pretty thick and covers a lot of surface area, if the screws are tight, and especially if you use rivits, the gl*** won't be anywhere near them.