Projects 33 Terraplane

Good work. I’m surprised you haven’t gone insane.[emoji6]


Sent from my iPhone using The H.A.M.B. mobile app

 

Did some more work this weekend. Slowly picking away at it. I did some more on the floors and started putting in a battery box.

 

Your looking good ! Great progress.

 

Did some more on the floors. I also took it off the frame table. Looks way different on the floor. I like it alot this thing is going to be wicked when done.

 

Here are 2 more pictures. My 9 year old daughter just came down to the garage. She saw it and said cool dad. She's my future hot rodder. I'm slowly teaching her about old cars and hot rods.

 

Your body closely resembles the European Deuce that had suicide doors. Where the Hell are all of these jewels? Don't recall ever seeing one ! Good luck.

 

Would there be much cutting up to "slip" a SBC/700R4 between the sheets, lower it a bit, then drive it like ya stole it? That is a beautiful ride as it sits. Oh, I forgot Vintage Air a/c-heat. That makes it a year-round cruiser. Now, I have to buckle my non-traditional seatbelt and get ready for the flak. LOL

 

A bit of humor at this point is just what this post needed. EGADS ! ! !

 

Looking wicked good !!!!

 

Done some more work. I got the axle degrees set and the wishbone's mounted.

 

Well have not been doing too much. I got the front post looking good. When I did the chop. It made it not look right. I also did some work on the rear of the body and have been doing some dolly work.


Sent from my iPhone using The H.A.M.B. mobile app

 

Your looking good. I had to fuss with my wind shield posts also after welding from the chop.

 

I like what you did with reshaping the back and the beading. Looks nice.

 

Love this orphan !

 

So not been doing too much. Doings small things here and there. I finally got around to bending the steering arms and got some steering linkage on. I will still need to magna flux them. I also need to get the pitman arm on the Vega box figured out. The ford tie rod don’t fit right. The hole seems a little too big. So if someone knows. Where to get pitman arm to fit the 35 Ford tie rod part number would be great. I did also work on the driver side door some.


Sent from my iPhone using The H.A.M.B. mobile app

 

I just realized I’m pretty sure. I posted none of this work.


Sent from my iPhone using The H.A.M.B. mobile app

 

I just read through your entire build. Nice work! It’s looking really good!


Sent from my iPhone using H.A.M.B.

 

Your looking very good and have accomplished a lot. On the pitman arm I am pretty sure ( can not find my invoice) I used Speedway part # 7022924- SS ( stainless $74.99) there is also Part # 7022924-PLN (plain $54.99). Would like to see more pictures on your door repairs. Mine are also crap.

 

Thanks


Sent from my iPhone using The H.A.M.B. mobile app

 

I will post some more pics soon. I can send you some too.


Sent from my iPhone using The H.A.M.B. mobile app

 

nice build along with the upgrade(s) ( esp the with the license plate )

 

I got some more done this weekend. I’m slowly picking away at it. I got the steering box mounted and the wishbone mounts done[emoji846]

 

Some more


Sent from my iPhone using The H.A.M.B. mobile app

 

Done a little work today. I got the fuel filler/cap in.


Sent from my iPhone using The H.A.M.B. mobile app

 

Today I added a small reinforcement to the bottom of the motor mounts. Some befor and after pictures.[emoji846]


Sent from my iPhone using The H.A.M.B. mobile app

 

Love what you are doing ! Those mounts are very artfully done -and they aren't going anywhere !

 

Fuel filler looks perfect where you put it and how you did it!