Projects Model A Coupe build............

They came with the body when I bought it so I don't know where there from. None of them really fit right, but that's normal I heard. Gets me close and then I just beat em till they fit.


Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

I flush mounted my doors. Removed wood and welded in fabricated door jams on my '30

 

Sounds cool. Have any pics? My doors are still not fitting great.


Sent from my iPhone using The H.A.M.B. mobile app

 

Cutting the cancer out, replacing about 40" of both sides.


Sent from my iPhone using The H.A.M.B. mobile app

 

This Hot Rod just got a hell of a lot cooler. Boling Brothers rocks. [emoji482]


Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Mocking up.








Sent from my iPhone using The H.A.M.B. mobile app

 

Didn't realize after I painted the spindles I had to grind the tops to fit in the Lincoln backing plates. Live and learn.


Sent from my iPhone using The H.A.M.B. mobile app

 

Primer coat done on the ch***is final coat going on today.


Sent from my iPhone using The H.A.M.B. mobile app

 

Looks beautiful. Bob......

 

Hi i just bought my first A, and try to think these stance(chop,channel) things. and i just ask offer to same frame, its 2" & 8", right? so i really cant wait what it look like. good thread keep posting!

 

It's a Boling Brothers 4"-10" frame. Slow moving lately, hope to hop back on it soon and make some progress. Good luck man.

Sent from my SM-T530NU using The H.A.M.B. mobile app

 

Thanks


Sent from my iPhone using H.A.M.B.

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Been awhile since I posted some pics. It’s getting there.


Sent from my iPhone using H.A.M.B.

 

A buddy of mine scored these for me for $50 bucks. Stoked


Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

How much chop ? You might want to consider lower cut lines as there will be less distortion near the curve of the window opening. Also consider making your back cuts in a lower area then bring it up to the back window. There won’t need pie cuts in the top. Just trying to help, looks great so far.


Sent from my iPhone using The H.A.M.B. mobile app

 

I just saw that you have to pie cut it if it is a straight cut. Kinda was messing around with how I’m going to do it. Thanks for the pics, huge help I think I’m going to go your route. [emoji1360]


Sent from my iPhone using The H.A.M.B. mobile app

 

Back in Black. Shot some epoxy primer so i didn’t have to deal with flash rusting. Time to brace it up and channel it then chop.




Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Sent from my iPhone using The H.A.M.B. mobile app

 

Very nice work. Imo if you channel you dont chop if you chop you dont channel.again that’s just me.

 

Tried to make these look like they belong there. Rounded out the cut so the heim joint blends in rather than a straight angle cut. Going to enlarge the curve a bit and weld in some round rod.



Sent from my iPhone using H.A.M.B.