I'm looking through my catalogs and online but I only come up with a brake tee. I'm looking for a 90 deg, double female inverted flare fitting. Something that a hard line will just screw into on both sides. I know I can just bend the line but I went easy this time a bought a line kit (cheap too). If I want to use just a union then I have to shorten the pre bent stuff, which isn't saving me time (which is why I bought the kit in the first place). I also like the idea so the fitting will be touching the frame and not the line so rubbing will be at a minimum. Just think of a brake tee without one port........which I can also do is just to use a tee and plug a port, but that looks like ***.
They're all inv to npt, looks like I'll be shortening lines. The Task Force trucks are odd (at least my panel), the brake tee is on the p***enger side frame rail and that feeds the p*** front AND the rear......a single line to the front drivers side.
Inline tube has 3 listed in their streetrod catalog. Part no. El 50, el60 and el 70. Is that what your looking for?
Did you find a place for fittings? I need a male to female 90 fitting so my coe hood dont rub on the line. Anyone have any ideas?
one of my favorite sites for weird brake fittings: http://www.brakeconnect.com/ alls orts of problem-solvers here. dunno if they have your 90 degree female elbow.
Go here:http://www.eaton.com/EN/ecm/groups/public/@pub/@eaton/@hyd/do***ents/content/pll_1015.pdf A lot of great info on all sorts of fittings, inverted flare a**** them.
The Jalopy Journal
