Technical Sbc Holley street dominator intake

Has anyone used A Holley sreet Dominator intake. They made different ones but the one I'm looking at is A vintage spread bore, single Plane intake.

 

I ran one on the street on a slightly warmed up 350 years ago in a '65 C10. I used a basically stock spread bore carb on it and it ran really well. Well enough to blow up the M22 tranny, drive line joint stub and spider gears.

 

If you use a single plane, you either want to be running a manual trans or you'll need a high stall torque convertor with the issues that attend that. They don't have much off-idle power.

 

Thanks guys,I appreciate the help.
The motor I'm wanting to install the intake on is A pretty strong 350 .I will be running A 4 speed manual transmission and 3.73 rear gears.

 

I once owned the Holley Strip Dominator... Pretty cool intake.....