Register now to get rid of these ads!

Ford 427 SOHC engines

Discussion in 'The Hokey Ass Message Board' started by lothiandon1940, Dec 19, 2012.

  1. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member

  2. RmK57
    Joined: Dec 31, 2008
    Posts: 2,842

    RmK57
    Member

    Ford in a Ford...heaven !

    [​IMG]
     
  3. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member

    Good find that is AWESOME.
     
  4. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member

    Pete robinson is Wearing His Usual Smile. This photo Shows The 2 Inch Blower Drive (a 3 Inch Version Weighed A Few Pounds More, So He Rejected It) System That He Used For His Early ’Cammers. He Had No Belt Problems. But A Year Later, Blower Overdrive Dictated The 3 Inch Setup. The Cams In This Engine Were Still Chained Together.

    5 int.jpg

    Harvey Crane Made His Dynamometer Available So Pete Robinson Could Validate The Theory That Cam Chain Stretch Was Retarding Timing And Exploding His Superchargers. For Proof, He Rigged Degree Wheels, A Strobe Light, And An 8mm Movie Camera To Record The Phenomenon.

    1 sohc.jpg
     
  5. And the outcome was?

    Don't leave us hangin'!
     
    loudbang and mad mechanic like this.
  6. 427 sleeper
    Joined: Mar 8, 2017
    Posts: 3,138

    427 sleeper
    ALLIANCE MEMBER

    I'm thinking that his suspicions were correct, that's why he designed and ran the gear drive system for the cams.
     
  7. Deuces
    Joined: Nov 3, 2009
    Posts: 24,875

    Deuces

    I would have went freakin' nutz trying to figure that one out.....:confused:o_O:(
     
  8. Hotdoggin DaddyO
    Joined: Jul 23, 2011
    Posts: 702

    Hotdoggin DaddyO
    Member
    from Hays, Ks

  9. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member


    @427 sleeper nailed it he proved the cam stretch and went on to develop a gear drive.
     
  10. Cool.

    Seen the photos of the gear drive set-up but didn't realise the events that led to it.
     
  11. 6sally6
    Joined: Feb 16, 2014
    Posts: 2,604

    6sally6
    Member

    Would like to see the gear drive for THAT!
    6sally6
     
    lothiandon1940 likes this.
  12. 427 sleeper
    Joined: Mar 8, 2017
    Posts: 3,138

    427 sleeper
    ALLIANCE MEMBER

    It's a pretty cool set up. 1131033445.jpeg 886818754.jpeg
     
  13. RmK57
    Joined: Dec 31, 2008
    Posts: 2,842

    RmK57
    Member

    Were Mickey Thompson, Tommy Grove, Gas Ronda and the rest using this gear drive setup?
     
    loudbang likes this.
  14. .........For sure!
     
    OLSKOOL57 and loudbang like this.
  15. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member

  16. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member

  17. ^^^^Beautiful^^
     
    Spooky and Deuces like this.
  18. loudbang
    Joined: Jul 23, 2013
    Posts: 40,322

    loudbang
    Member


    It's a hell of a story. He HAD a redone 1961 Starliner and was at a car show and some guy said I want to buy it to add to my 1961 collection. At first he said no. Thought about it and said ok went to the other guys place and he had an indoor museum type place with many "good" fords and several Cammer engines.

    The original guy said I have one condition I want one of these cammers. Deal was done and the cammer went to him and sat for several years.

    He then began to miss his 61 and went looking and found one to restore found one and it became the new home for the cammer.
     
  19. mgtstumpy
    Joined: Jul 20, 2006
    Posts: 9,227

    mgtstumpy
    Member

    upload_2019-11-10_13-53-5.png

    I've posted other photos of this car before, once more
    upload_2019-11-10_13-55-15.png

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Nov 9, 2019
    1947knuck, Spooky, alfin32 and 10 others like this.
  20. seb fontana
    Joined: Sep 1, 2005
    Posts: 8,738

    seb fontana
    Member
    from ct

    [​IMG]Man I would have loved to see this run! Heard it run/drive into a local show once, what a vibrating memory!
     
  21. mgtstumpy
    Joined: Jul 20, 2006
    Posts: 9,227

    mgtstumpy
    Member

    upload_2019-11-14_18-5-32.png

    upload_2019-11-14_18-5-53.png

    upload_2019-11-14_18-6-42.png

    upload_2019-11-14_18-7-30.png

    upload_2019-11-14_18-7-9.png
    Local Ozzie car :D
     
    1947knuck, Spooky, alfin32 and 10 others like this.
  22. Deuces
    Joined: Nov 3, 2009
    Posts: 24,875

    Deuces

    Wicked!......
     
    Spooky, loudbang and lothiandon1940 like this.
  23. RmK57
    Joined: Dec 31, 2008
    Posts: 2,842

    RmK57
    Member

    I love this truck, and one of the most bad ass engines built.


    Brandon's East Bay Speed & Custom 10-30-2017 (3).JPG Brandon's 11-12-2018 003.JPG
     
  24. mgtstumpy
    Joined: Jul 20, 2006
    Posts: 9,227

    mgtstumpy
    Member

    ^^^^ Coyote engine, NOT a cammer despite the faux rocker covers. No timing chain cover or distributor plus WP and outlet are different as is intake etc. Here's another similar set up built by Hollywood hotrods
    upload_2019-11-16_13-36-4.png
     
  25. RmK57
    Joined: Dec 31, 2008
    Posts: 2,842

    RmK57
    Member

    Good catch! I still like it though.:D
     
  26. RmK57
    Joined: Dec 31, 2008
    Posts: 2,842

    RmK57
    Member

    Trying to redeem myself for the Cammer impostor....

    Ford Cammer Cover.jpg
     
    Last edited: Nov 16, 2019
  27. 427 sleeper
    Joined: Mar 8, 2017
    Posts: 3,138

    427 sleeper
    ALLIANCE MEMBER

    ^^^^^^^ All is forgiven! ^^^^^^^
     



  28. Sent from my iPhone using H.A.M.B.
     
    Deuces, lothiandon1940 and loudbang like this.
  29. mgtstumpy
    Joined: Jul 20, 2006
    Posts: 9,227

    mgtstumpy
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.