Technical Upper radiator hose for tri power 32 walker radiator

Does anyone have a part number for a upper radiator hose that will work on a 32 ford walker radiator with a tri power set up on a small block chevy. I tryed a napa 7029 but that doesn't work because of the offset to the driver's side of the intake manifold.
Thanks Jeff

Sent from my SM-G930V using The H.A.M.B. mobile app

 

Just get a thermostat housing that works.

 

I never knew there was tri-power radiators. All my vehichles use the standard rads so I guess they are uni-power? LOL

 

Never really realized how many different angles you could get from a chevy thermostat housing. Any suggestions on the angle?

Sent from my SM-G930V using The H.A.M.B. mobile app

 

You can get one that is straight up.

 

I will look into that. It would have to be pretty short to clear the front carburetor.

Sent from my SM-G930V using The H.A.M.B. mobile app

 

Tri 5 v8 correct tstat housing

 

Go down to your local Autozone/O'Reilly's/etc and get a length of heater duct hose in the correct size for the thermostat housing and rad inlet. Bend it to fit your configuration, then go back and match it up with a radiator hose. Easy, peasy!

 

Thanks for all the feed back. Any more is greatly appreciated.

Sent from my SM-G930V using The H.A.M.B. mobile app

 

A thermostat housing from a 1980 chevy citation V6 goes straight up and fits the V8 manifolds. Discontinued part number but might be available after market. Have one on my '32 with walker radiator.