56 Ford engine swap

Oops here is your mount https://www.ebay.com/itm/For-1955-1...955649?hash=item444ebf9981:g:n-kAAOSwQlZd9p-j If you want to cut a hole what you have should work

 

haha those mounts do look like they would do the trick.

I mocked up some wood blocks last night and think that I can shim the engine up to the top bolt hole by machining out a 1/2 inch plate that will go between the mounts and the engine block. I'll design it to have 3 grab locations for the block as well instead of just the two. Seems like it should work right?

 

You got the wrong mounts. a 55 and 56 mount has two studs on it. I pictured a really old original 56 mount for ya.

 

Right on, Old wolf. Thank you much.
Looks like Sunbeam caught the same thing. The link he sent has a very similar mount to what you just posted. Does this look correct?

https://www.ebay.com/itm/293378955649

 

Yes that's the correct mount. you can also make a 1/4 inch spacer to fit between the block and mounts and raise the engine a bit.

 

Perfect, thank ya sir!