Technical TH350 Dust cover isssue...

Hi there!
I have a th350 trans with a 168 tooth flexplate in a 68 camaro, I order this dust cover that supost to fit in, but it doesn´t...

https://www.summitracing.com/parts/sum-g3883

Does anyone had the same issue? Should I order the dust cover for the 153 tooth flexplate? How can I recognize one from the other?
Thanks!

 

Did you read the reviews on the Summit site? Many complaints about holes do not line up and needing to do some bending to get it to fit. But most got it to fit after fighting with it. Of course at that point not sure what the chrome looks like.

 

After market almost never fit without a little help. Where is it off?

 

Thanks for the answers! According to Summit site, this should be the right dust cover... but it hit the flexplate and the torque converter

 

I had the same issue several years ago and if your pan was made in China then do one of two things . Send it back to Summit or throw it away. Chinese stuff is JUNK!!!!!!! Find a stock pan.

 

If it is a car that you are going to drive just run without one. Problem solved.

 

I bought one for my 700R4 and had to trim it to fit so the bolt holes would line up. Have at it.

 

Had the same issue. In 2 minutes on the shrinker/stretcher I was able to “move” the holes over a little and now it fits fine.


Sent from my iPhone using H.A.M.B.