Technical Chevy 292 camshaft blank

I'm looking for a chevy 292 l6 camshaft blank so I can have my camshaft grinder build me one

He can't seem to find one cause of the c19 ****

 

12 Bolt.Com should have some as well as finished cams

 

I just want a blank he has someone grind his cams
I can't use a core camshaft

 

roller (steel) or hydraulic/flat (c.i.)?

 

Tried Delta Cams
Tacoma Wash. ??
6sally6

 

Steel flat mechanical

 

Comp. Cams in Memphis, TN. They have blanks and will grind anything you want.

 

you'll probably lose the fuel pump lobe

 

No it will be on a blank the trouble I can find a 250 blank but then I would lose my fuel pump lobe

 

Flat tappet cams are ground on cast iron cores.
Roller cams are ground on billet steel cores

 

Howard cams sells cams for 292 sixes. You would have to check to see if they will sell a blank.

From what I have seen Delta cams mostly does regrinds. My buddy used to Take them a load of cores and get a fresh reground cam back for X# of cores he took over.

 

The cam I want they can't use a core

I found something close I want but a little to much lift