Customs Help! 57 chevy question

Guys need some help
What is this hole....it looks factory what covers it...is it a water outlet...looks like water will go straight inside

 

Nope, it doesn't belong. Close it up.

 

Radio antenna lead ? A clear picture would help.

 

Looks like a rust hole to me...

 

A better picture is needed, although I just took some pictures of mine and have a hole (no wise cracks) that has a factory plug in it and is about where I think you show your's a second one is also factory inboard and forward of the first and about above heater opening. Look in the Danchuk book under grommets for that plug. I have an ***embly manual I would have to dig it up. If you are building or just own a 57 I would recommend buying both manuals, service and ***ymbly.

Pat

 

The OP is pointing to a rust hole in the corner. His radio antenna hole is welded shut.

@1934coupe has sound advice.

 

Should have some puckie in it.

 

Thanks for the advice guys....it doesn't look like a rust hole...I did weld the antenna hole shut ....I might just weld it in

 

Thanks pat...

 

You guys really need to hit the "full image" ****on before you hit the post ****on. Not you, Steve.

 

It looks like there has been some firewall/cowl/air box work done; my guess is it's just part of the work that was done, and not sealed up. I am Butch/56sedandelivery.

 

Agreed, I'd put seam sealer in it.

 

I'm ***uming that's short for "acken-puckie"? You could also glue a piece over the hole using a blob of "poly pecker".

 

Mine does not have that hole either. That'll drain directly into p***enger toe board area