Leftover pieces from my pickup truck build. Some p***enger car pieces, some pickup specific. Call (707)280-8305 for more pictures or details. - 33-34 Ford pickup/commercial grill. Very straight, $500 (Originally this was listed as a 32-34, but someone chimed in and said it was 33-34. I'm happy to take whatever pics you like to confirm) - 32-34 Ford pickup windshield garnish moldings. Both driver side. One is repaired (shows well on outside, but repair visible on inside), $30. One very straight/clean, $45 - Model A pick up stainless steel bed strips (new from C&G Ford), $45 - 37 Ford tail light (new from Speedway), $35 - 32 Ford pickup wind lace strips. All have some straightening needed. Enough here to probably do an entire truck, $125 - 32 Ford headlight housings. Chrome rings are nice and show well. Housings are straight, though they have been painted at one time, $50 SOLD - 32 Ford radiator. Not sure if it was for an SBC or a banger. Most likely needs a re-core, $100 - 33-34 Ford pickup truck seat base. Springs are in good shape, $75 SOLD - 32 Ford rear cross member. Beautiful shape, $200 SOLD - 32 Ford pickup tunnel. Straight as an arrow, $50 - 32 Ford tail light and license plate bracket, $40 - 32 Ford tie rod. Ball joint ends. See pics, $40 - 32 Ford headlight bar, $175 - 32 Ford rear frame doublers. I had these custom made to convert an early frame to a late. Laser cut with a water jet out of 10 gauge steel, $200 - Core parts: 59a water pump cores, stock flathead exhaust manifolds, 32 drums (mechanical), 11 inch flywheel, early flywheels (with lip). $MAKE OFFER$ - 8ba blocks: tanked, magnafluxed, steel main caps, line bored, o-ringed and decked, $1200 - Fenton 2 pot intake. See pics. Clean and unbroken, $325
The Jalopy Journal
