Register now to get rid of these ads!

Hot Rods I know I am slow but

Discussion in 'The Hokey Ass Message Board' started by BURN OUT BOB, Dec 29, 2020.

  1. BURN OUT BOB
    Joined: Apr 16, 2005
    Posts: 1,859

    BURN OUT BOB
    Member Emeritus
    from western AZ

    Boy I have to replace the engine & I know I am slow but I sure hope it doesn't come to this!!!!
    [​IMG]
     
  2. HOTRODPRIMER
    Joined: Jan 3, 2003
    Posts: 64,742

    HOTRODPRIMER
    ALLIANCE MEMBER

    Bob, I don't think I would trust that jack stand! HRP
     
    VANDENPLAS likes this.
  3. desotot
    Joined: Jan 29, 2008
    Posts: 2,037

    desotot
    Member

    A bit of bondo ought to fix that one.
     
  4. BURN OUT BOB
    Joined: Apr 16, 2005
    Posts: 1,859

    BURN OUT BOB
    Member Emeritus
    from western AZ

    :oops:PS: I forgot to add that it was sent to me by a friend. I guess he or she knows me pretty well. I must do better in 2021.;)
     
    dana barlow and VANDENPLAS like this.
  5. NWRustyJunk
    Joined: Jan 2, 2017
    Posts: 481

    NWRustyJunk
    Member

    Made of quality Chinese metal! lol
     
    loudbang and VANDENPLAS like this.
  6. moparboy440
    Joined: Sep 30, 2011
    Posts: 1,129

    moparboy440
    Member
    from Finland

    100% genuine Chinesium
     
    1952henry, loudbang and 302GMC like this.
  7. 51504bat
    Joined: May 22, 2010
    Posts: 5,624

    51504bat
    ALLIANCE MEMBER

    Return it to HF as part of the recall.
     
    rbrewer and loudbang like this.
  8. stanlow69
    Joined: Feb 21, 2010
    Posts: 7,346

    stanlow69
    Member Emeritus

    I know of a car that sat in a shop so long. The 4 flat tires were stuck to the floor. The car had to be broke loose with a couple floor jacks.
     
    rbrewer, Budget36 and loudbang like this.
  9. Sky Six
    Joined: Mar 15, 2018
    Posts: 15,798

    Sky Six
    Member
    from Arizona

    Its not a problem. Here is what you have to do; take a wire brush and clean up the rusted area near the missing legs of the stands then get some half inch rebar and fire up the wire machine with .035 wire. Weld the holy living chit out of the rebar/brushed legs. Use as much rebar as necessary until you are sure of the safety. Paint with rattle can epoxy appliance white and there you go... Near new and ready to use.

    P.S. Have wife look up insurance agents number if needed.
     
    alanp561, Aaron Dupont and Budget36 like this.
  10. hotrodjack33
    Joined: Aug 19, 2019
    Posts: 4,890

    hotrodjack33
    ALLIANCE MEMBER

    Ahhhh, Welcome to my world. Licensed and practicing Jounrnyman Slackmaster:p
     
    alanp561, fauj and Hnstray like this.
  11. Max Gearhead
    Joined: Oct 16, 2002
    Posts: 7,855

    Max Gearhead
    Member
    from Wisconsin

  12. Hollywood-East
    Joined: Mar 13, 2008
    Posts: 2,147

    Hollywood-East
    Member

    I was thinking a brick kicked under.. Keeping with the theme
     
    Sky Six likes this.
  13. drtrcrV-8
    Joined: Jan 6, 2013
    Posts: 1,806

    drtrcrV-8
    Member

    This needs to be over on the "Is this a quickchange rearend?" thread!! ...LOL!
     
    Hollywood-East likes this.
  14. bobss396
    Joined: Aug 27, 2008
    Posts: 18,739

    bobss396
    Member

    Put a couple of bricks under it... good to go...
     
  15. Happydaze
    Joined: Aug 21, 2009
    Posts: 2,370

    Happydaze
    ALLIANCE MEMBER

    'China virus' works on Chinese steel?

    Chris
     
    moparboy440 likes this.
  16. Sporty45
    Joined: Jun 1, 2015
    Posts: 1,387

    Sporty45
    Member

    Hmmm...I think I'll take a walk out to the garage and check mine :p
     
  17. Budget36
    Joined: Nov 29, 2014
    Posts: 15,303

    Budget36
    Member

    Only thing better would be if it was bubble gummed with a stick welder;)
     
  18. rockable
    Joined: Dec 21, 2009
    Posts: 5,060

    rockable
    ALLIANCE MEMBER

  19. Nothing wrong with your timetable Bob, you just need a drier place to not work. o_O
     
  20. I was thinking some sticks and hose clamps would do the job nicely!
     
    Sky Six likes this.
  21. gearheadruss
    Joined: Apr 23, 2012
    Posts: 154

    gearheadruss
    Member
    from Seattle

    I think they recalled your jack stand in 1947
     
  22. Country Joe
    Joined: Jan 16, 2018
    Posts: 549

    Country Joe
    Member

    Soak that stand in Evapo-rust. It will be good as new tomorrow.
     
    clem likes this.
  23. 1952henry
    Joined: Jan 8, 2006
    Posts: 1,583

    1952henry
    Member

    I bet she would be upping the policy whilst you worked under it.
     
    Sky Six likes this.
  24. BJR
    Joined: Mar 11, 2005
    Posts: 11,282

    BJR
    Member

    Wow Bob, since that project has been on that jack stand long enough to rust away, it may be time to sell it to the next younger guy who has a chance to finish it. We are all getting old, hell I will be 71 in January. At this age we need to take a good look at what our capabilities are and what we can realistically do now. Time to get rid of the someday projects, and finish the ones that we (at our older age ) can finish. You ar not alone in this. Brian
     
    loudbang likes this.
  25. indyjps
    Joined: Feb 21, 2007
    Posts: 5,396

    indyjps
    Member

    You gonna metal finish that repair, or slack off and have to use filler? :D
     
  26. DDDenny
    Joined: Feb 6, 2015
    Posts: 22,412

    DDDenny
    Member
    from oregon

    Bob
    My progress has also "dilly dallied".
    So I took down all my calendars!:p

    dil·ly-dal·ly
    /ˈdilēˌdalē/

    verb
    INFORMAL
    past tense: dilly-dallied; past participle: dilly-dallied
    1. waste time through aimless wandering or indecision.
      "don't dilly-dally for too long
     
  27. Budget36
    Joined: Nov 29, 2014
    Posts: 15,303

    Budget36
    Member

    I think some missed the part where Bob said the pic was sent to him...
     
  28. chevy57dude
    Joined: Dec 10, 2007
    Posts: 9,655

    chevy57dude
    ALLIANCE MEMBER

    Being a cheap ***, I'd salvage the locking pin.
     
    Sky Six and Budget36 like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.