Register now to get rid of these ads!

Hot Rods Your thoughts on buying rotted A roadster hot rod.

Discussion in 'The Hokey Ass Message Board' started by VintageOriginal, Jan 7, 2021.

  1. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    I came across this for sale. Old hot rod sat in a shed for years rotting. Comes with some loose ends. Patch panels, frame, 16” rims, gas tank, axles. No ownership. Asking $2400 (USD) but seems like $1800 is his number.
    What’s your thoughts? Big project, but is it just junk and walk away, or worth trying to save??
    IMG_0556.JPG IMG_0557.JPG IMG_0558.JPG IMG_0559.JPG IMG_0560.JPG IMG_0561.JPG IMG_0562.JPG IMG_0506.JPG IMG_0507.JPG IMG_0508.JPG IMG_0509.JPG IMG_0510.JPG IMG_0511.JPG IMG_0512.JPG IMG_0513.JPG IMG_0553.JPG IMG_0554.JPG IMG_0555.JPG IMG_0514.JPG IMG_0515.JPG
     
    Stogy, dana barlow and AHotRod like this.
  2. badshifter
    Joined: Apr 28, 2006
    Posts: 3,577

    badshifter
    Member

    You're going to need a donor car to save that car.
    Pass on that one, and buy a donor car and build it.
     
  3. BJR
    Joined: Mar 11, 2005
    Posts: 10,555

    BJR
    Member

  4. AVater
    Joined: Dec 9, 2008
    Posts: 3,288

    AVater
    ALLIANCE MEMBER
    1. Connecticut HAMB'ers

    I’m not typically negative but I don’t see $1800 there but can see many more $ if you buy it.
     
  5. Squablow
    Joined: Apr 26, 2005
    Posts: 17,815

    Squablow
    Member

    Is it neat? Yes. Is it worth saving? Also yes. Would I pay $1800 for it? Probably not.

    The frame looks clean, but they're not real pricey, and I personally wouldn't use either one of those front axles. Not sure what that rear is, but it's nothing super valuable.

    The patch panels for the quarters help, also helps it was a real roadster. Has the roadster cowl with windshield posts, neat Shoebox dash swap, a saveable trunklid and tulip panel, and some rough but fixable doors. Grille shell, hood and radiator are pretty sweaty looking, not worthless but certainly not nice. So there's some value there. But this is a huge project, even for someone willing to dive into the metalwork.

    Generally, if you're buying a project in a pile, the pile should be cheaper than the sum of the individual parts, and I think it'd be really tough to part this out for $1800 without a title.

    It's neat, but I think it'd have to be less than a grand for me to get excited about it, even if I really wanted one.
     
  6. Buying a set of stanchions and a dash for $1800?
     
  7. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    [emoji23][emoji23]
     
  8. Keep in mind that the OP is in Canada so $2400 USD is a HUGE pile of cash when converted to Canadian Tire mon ---- errrrr, Canadian money o_O


    My opinion .... I'd haul my dog off to the vet for a shot if he pissed on that mess. I wouldn't even think of buying that thing at anywhere near what he is asking or hoping to get.
     
  9. If you buy it, this time next year you will wish you hadn't.
     
  10. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    Exactly. I posted in USD just to keep it simple.
     
    5window likes this.
  11. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    Thanks for everyone’s input. I think the money is best put into my other cars. I just didn’t want to regret passing something up.
    Thanks all. Have a great new year.
     
  12. BamaMav
    Joined: Jun 19, 2011
    Posts: 6,969

    BamaMav
    Member
    from Berry, AL

    You forgot to put in the decimal. $18.00
     
  13. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    [emoji23][emoji23][emoji28]
     
    210superair likes this.
  14. I'm a border guy too, and I'd pick that up if it were close to me, but not for that price. Once you buy one, better pieces tend to turn up. Sometimes the start of a great project; sometimes.
     
    VintageOriginal likes this.
  15. big duece
    Joined: Jul 28, 2008
    Posts: 6,898

    big duece
    Member
    from kansas

    You'd have more fun at the club with 1800 one dollar bills. Keep looking for a better one...
     
  16. Saw that on kijiji , cool looking pile o parts but not worth the price of admission.
     
    VintageOriginal likes this.
  17. fortynut
    Joined: Jul 16, 2008
    Posts: 1,038

    fortynut
    Member

    Sometimes we see things no one else does. Money is only a means of exchange. If there is something you think will take you to another level the money you spend is just a stepping stone to a plateau of where happiness exists momentarily. It is like getting a fix, and then moving forward through another battleground with conscience, self-esteem, peer group pressure and a whole pyramid of other factors pressing on you. Then, of course, there is the work to build something that takes actual material world values to consider. Being a Hot Rodder is a lot like being an outlaw. You need a tough as nails conscience and cannot use the same value system those who buy used cars, or new ones, in order to express to those you must deal with the logic of your choices. This puts all of us, in many respects, outside the parameters of acceptable social acceptance. Truly, to most people, those who worship at the altar of old iron are Hoodlums. So to ask if those pieces of rusted metal are worth the money, what are the other alternatives you have for your 'fix'? That is how to decide. And, I see you said the money would be spent on something you already have. Then why are you looking around at this junk, taking up our valuable time and folding like a man with a broken straight? Ha ha.
     
    Last edited: Jan 7, 2021
    woodsnwater, ClarkH, Algoma56 and 4 others like this.
  18. WB69
    Joined: Dec 7, 2008
    Posts: 1,958

    WB69
    Member
    from Kansas

    I believe I'd pass on it myself.
     
    VintageOriginal likes this.
  19. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    In case I’m not seeing something in this. Is it worth grabbing and tucking away for another day. Spread money over a new project or just keep dumping into the 3 I’m doing.
     
  20. 19Fordy
    Joined: May 17, 2003
    Posts: 8,246

    19Fordy
    Member

    You will regret buying that scrap metal but the seller will be smiling.
     
  21. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    10-4.
     
  22. bangngears
    Joined: Aug 30, 2007
    Posts: 1,241

    bangngears
    Member
    from ofallon mo

    I like to look at things in a positive way. I would positively run
     
  23. Pretty tough pile of car , ownerships are getting tougher to get and that will be the second out !!! If you had to get out for one reason or another how long would you wait to get 1800.00 back for it ??
     
    VANDENPLAS and VintageOriginal like this.
  24. lippy
    Joined: Sep 27, 2006
    Posts: 6,848

    lippy
    Member
    from Ks

    If you have a lot of free time and you are looking for a challenge,(cause it certainly is), buy it and blast the rust off and see what's left. Not much I wager. I would save my money and look around. JMO. Find a nice body and buy it. Go from there. Lippy
     
    VintageOriginal likes this.
  25. Reidy
    Joined: May 13, 2016
    Posts: 226

    Reidy
    Member

    If you are genuinely asking the question you probably already know the answer. If you are very good with metal work you will know how many hundred hours there are ahead of you. If you need someone to do the metal work the $1800 is going to be such a small part of the bill it will be insignificant.

    If you do want to buy, what do you think it is worth? Offer the seller that. One of the best ways is put your phone number and dollar value. If he gets back in a week with a yes then give him the money.

    For me personally I would not pay one dollar, it may be worth a lot more to others but all I could do is try and part it out. When you factor in your own time of waiting for buyers not to turn up, muck you around and such. It can be a tough way to make a few hundred.

    Steve
     
  26. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    Thanks. I have other projects. It’s a super rough body. I just hate passing up roadsters. I have a couple roadster ownerships in hand as well. But seems like the consensus is a pass on this one
     
  27. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    [emoji23][emoji23]
     
  28. VintageOriginal
    Joined: Oct 1, 2009
    Posts: 95

    VintageOriginal
    Member

    Sound advice. Thanks
     
  29. Mr48chev
    Joined: Dec 28, 2007
    Posts: 34,933

    Mr48chev
    ALLIANCE MEMBER

    That body is going to be way more patch panel than original Henry when it is all done.
    To me it's worth what the going price for a Model A frame in that shape with the chassis parts that are there is plus an honest price for the usable parts off the body. That being what you could actually use on a different body without a huge amount of repair.
     
    48fordnut and VANDENPLAS like this.
  30. If you have to ask, you know the answer! [emoji686]


    Sent from my iPad using H.A.M.B.
     
    dana barlow, osage orange and Cosmo49 like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.