Model A to T-5

Does anybody have any info on the best kit to mate a T-5 & juice brakes (mostly concerned about the pedsals & master cylinder) to a stock model A? I tried the Model A board but the purists said, 'why no just leave it stock" - I said I'd like to AT LEAST keep up with slow lane traffic. Any leads would be great! Thanks Jim

 

There was a link at the "Ford Barn" site to a shop in GA that makes the kit, also on some of the banger speed sites. I will try to find it later tonight.

 

This was posted to FordBarn and to the HAMB.

http://www.macsspeed.com/products7.html

 

Thanks for the tip; that's a great site.

Supposedly you can use a Lakewood scatter shield, also. the block flange has enough meat to redrill for the A flywheel cover. You would have to index it to the crank centerline, first.

 

Jim come over and check out how I rigged the pedal on my sedan total cost was $30

 

The "Restorer" (Models A Ford Club of America) magazine has an add for a complete Borg-Warner 5-speed set-up for a Model A for $895.
call or write: Auto Restorations, 215 Gilbert St, Muncie.IN. 47305/1-800-955-3139

 

After machining a Model A bell housing and flywheel to accept a T5 I wished I had purchased my good friends alloy bell housing he casts for either A or B engines.