Hot Rods How about some love for the T-Bucket?

No one posted this?
I've always liked this one.
Talk about a car with nothing more than it needs. Minimal even a**** its brethren.
And definitely vintage.

 

I'm sorry folks but all the prior posted photos my in fact be nice Rods but "THIS" is how you build a T-Bucket. Anyone that don't understand "The Stance" is under 40 years old. This is The most Bad *** T of them all !!!

 

Now that is a...creative....display??

Looks like he's rocking a Model T "Fatman" steering wheel.

I'm south of 40 and the only T's I am really drawn too have "the stance"
And come to think of it, the only guys building T's without "the stance" are over 40.

 

Steel rebels great looking T.

 

I can see me stuffing my Neanderthal Knuckle dragging self in this, man I love this car. HRP

 

One of the best in "recent" years. RIP Steel Rebel.

 

Yeah @Blues4U , I don't know why somebody would put that much rake into a T bucket??? (sarcasm implied)

 

Too much cross pollination here. We have T buckets, Turtledeck T's and T modifieds being posted.

@Moriarity nails it with his vintage postings. I would go out on a limb and say most actual T buckets being built miss the mark and look like **** in one way or another. I think the reason for that is the nature of Ts and the folks building them. Less experienced and looking to build something cheap and quickly.

Chip was trying to steer this ship in his now derailed T bucket thread. to the point he quit posting and has mostly left the board. His T has been posted above.

 

I know this thread is about Buckets, but this Tub is cool. I think it's the same car shown here at Timonium Street Rod Nats east. I liked it with fenders. Bill

 

Very true in one way,about fitting in,T-body's are small. By 1926/27 Ts did get a bit bigger.
I see many say,OMG no-way I can fit!! < if your over about 6foot 2in. or so an around 250lbs plus<there are a lot of cars your not going fit well in. How ever,under that size,bad fit is most often bad seats,bad steering n pedal lay out taking up space,more then ,its too small!
I've sat in a good number of "T" buckets,many of them have seat an steering/pedal probs that could of been fixed but are not,for a ton of excuse's. Starting out with poor plan when built on to too lazy to fix latter.
A good buddy of mine,found a crashed T-bucket,ask if I help built a nother one with him out of the parts. Sure,but it was his car an being that,didn't take some advice an did others. In the end,his "T" came out fairly good. But it still has the too tiny seat and much too thick door panels{ Fat door panels of 8in. thick=taking up about 16in, of space side to side in ****pit. The upholstery was still ,kind of like new,when he got the wrecked T,about the only thing not damaged ,inside the body,and did not want to mess with that>it did look good,but just done to look good,not be used good. I'm adding photo were you can see his door panel fat pads/that take up ,I think too much room.
By the way,we found out why it crashed with first owner,his foot{heel} slipped off brake!!!= the brake pedal pad for foot was only 2in. up off the floor,so only drivers heel fit on brake. Ya,that got done much better on new build.

Note a few things in pic of completed 23T inside; floor is down 17 3/4 inch from top of door { less would take away a lot of lag room,seat back lays back at comfort angle n not super thick=so dose not take up room between dash n seat. Seat base bottom at top of pad,is 7in. at front an goes down to 3.5 rear ,fairly stiff foam. Streeing wheel hight n angle was test fitted before to be OK with lags. The brake pedal is a extra wide,is in front of column,about centered< so can be used by ether foot with lags both sides of column. There is storage be hind seat back,a small space storage under front base seat just behind front lip { 3in. high }m at front to zero rear} . This makes driving for me 6ft/200 good,but it is my son's "T",5-11/175 very good. Time test fit/mock up=well done.

 

^^^^^^^^^That's the definition of OT and EVERYTHING wrong with many T buckets

 

Yes, That is my car I was living in Philly at that time, BTW it was 2 BIRD T bucket bodies grafted together.

 

That is a great looking tub

 

As far as I am concerned a hot rod being built should be the owners interpretation and vision, to hell with what others think it should be!

 

I started building that car when I was 13 years old and got it on the road in 1963.

 

It was definitely a sad day when those "lame ***" Mr Gasket street scoops hit the market!
For some reason people have a way of ruining the looks of a neat hot rod with them.

 

They do not look good on anything including the shelf. Fake ****

 

So John , The caption says you were from Pittsburgh which I guess should of said Philly. That explains why I never saw it locally. BTW Your car makes my hormones all jiggly!! Bill

 

I'm getting close to double that age & I didn't care for it then & I don't now . We all have opinions, regardless of age ..

 

Here's a T bucket story with some real meat and potatoes to it, no fakery here.
Note: Some post 65 related material but the Von Dutch connection will make up for it.


https://www.hotrod.com/articles/found-1923-t-bucket-striped-von-dutch/

 

This one checks all the boxes for me. I love 60's t-buckets.