Register now to get rid of these ads!

chopped 53 buick pictures wanted

Discussion in 'The Hokey Ass Message Board' started by v8spence, Aug 11, 2006.

  1. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    Hi Guys,
    I need inspiration.....
    post some nice pics of chopped 53 buicks, a special would be fab.....

    I want to go to work on my 53 special but need to get some images in my mind.

    cheers,
    Spence
     
  2. len_m
    Joined: Jul 6, 2005
    Posts: 391

    len_m
    Member
    from wpg,can

    here is a pic of my buddys 53. we started the chop in the middle of april, he was able to drive it down to minniapolis for btt50's at the end of june (painted). we used a donor roof off a 52 buick which helped lots. the chop is about 5 inches. we ended up cutting the roof into 4 sections, lining up the pillars all the way around, then we placed roughly 3" strips overtop the gaps. welded them in, cut out the whole back window frame, cut some material out of the top of rear fender and bent parcel shelf down, moved the window about 0.5" towards the trunk. laid the window frame down, and was able to use the original window. shaved the handles, hood, trunk, drip rails. that was about it. then we used a gallon of fibreglass over all the welds. then about 2 1/2 gallons of bondo.

    like i said we started mid april, and just working weekends we were able to have it painted by mid june. there was about 3-4 of us usually working on it. and for all of us it was our first chop.

    sorry i don't have a better pic of it. this is all i have. if you really want i could take some more detailed photos.

    [​IMG]
     
  3. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    Hi Len_M,
    cheers for that, a few more pics would be great cheers,
    look forward to it.
    shame there arent many other old cars over here to donate roof's etc but we can improvise....
    cheers,
    Spence
     
  4. Slammed88
    Joined: Aug 23, 2005
    Posts: 1,331

    Slammed88
    Member
    from Canada

    This one is my favorite:

    [​IMG]

    [​IMG]
     
  5. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    ooooo, you have hit the nail on the head with that one!

    keep em coming chaps!
     
  6. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    there must have been articles done on "breathless", Rick Dores creation, does anyone know which magazines these were in so I can try and get a scan from them?
    cheers,
    Spence
     
  7. kustomkolin
    Joined: Jan 1, 2005
    Posts: 160

    kustomkolin
    Member
    from Herts UK

    Hey Spence,sounds like a UKK chop party is on the cards.I think the 49 Merc rear screen is the way to go.Is it staying a mordoor or you gonna 2door it?
     
  8. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    Kol.....IT IS 2 DOOR!!!!!!!

    I suppose I could "mordoor" it to be different!
     
  9. MonsterMaker
    Joined: Aug 11, 2004
    Posts: 1,812

    MonsterMaker
    Member

    heres the one I had.....53 Roadmaster[​IMG]
     
  10. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    nice......
    the problem I seem to have is, Mine is not pillarless which isnt a problem for a chop but it is if I want to go "carson removable" which would be the ideal situation...

    but, one step at a time eh!
     
  11. Here is a chop I did a few years ago....labeled as a 51 -it is actually a 53.... 3" chop level with rear glass moved [up into roof 3" and tilted forwards].
     

    Attached Files:

  12. JOE-KING
    Joined: Aug 9, 2006
    Posts: 4

    JOE-KING
    Member
    from VEGAS

    THIS IS MY 53' SPCL

    [​IMG]

    I USED A 57' BUICK REAR WINDOW 3"ish/5"ish(so many beers ago)!
     
  13. JohnnyP.
    Joined: Aug 3, 2005
    Posts: 1,301

    JohnnyP.
    Member

    hey theres one of these in my local junk yard. wonder what he wants for it.
     
  14. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    Joe-King,
    That is so sweet, just what I was hoping to find!!!
    Pillared and radiused "c" pillar too.
    if you have any more pictures, that would be great!

    Choprods, same question for you, any more pictures?
    Len-M, more pics would be great.
    roaddevil13, where did you get the wheel trims, fantastic....



    you guys have some nice chopped 53's, lets hope in the not to distant future, I can add mine to the collection!
    :)
     
  15. chub chub
    Joined: Aug 15, 2004
    Posts: 289

    chub chub
    Member

    Not my cars, but here are a couple pics that I probably got off the HAMB.
     

    Attached Files:

  16. Here's a 51 special I helped chop a dozen years ago. We put 55 cad tailights on it for a dramatic change.
     

    Attached Files:

  17. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    Hoboy,
    you wouldnt have any more pics would you?
    cheers,
    Spence
     
  18. Hey Spence I'll try and get a friend to scan some pics so I can email them to you. pm an email and when he sends 'em to me I'll forward them. Joe
     
  19. wonhunglo
    Joined: Feb 7, 2006
    Posts: 139

    wonhunglo
    Member
    from HD

    heres mine....... 53 buick kustom bagged, caprice tailights, packard bumber,350/350 running gear. all lead chop!
     

    Attached Files:

  20. wonhunglo
    Joined: Feb 7, 2006
    Posts: 139

    wonhunglo
    Member
    from HD

    some more.....
     

    Attached Files:

  21. Wonhunglo -- hey, NICE work. Great proportions. Not an easy top to chop with that big rear window. I sent you a PM.
     
  22. T McG
    Joined: Feb 12, 2005
    Posts: 1,263

    T McG
    Member
    from Phoenix

    Heres some semi crappy pics of a 53 I did some work on a few years ago. I grafted the dip from a 56 Buick to the side of it to make sort of like a Skylark hardtop. The interesting thing was it made the car look like it was sectioned, and really took a lot of bulk out of the side of it. Sorry I don't have any better pics of it.

    [​IMG]
     
  23. That looks sweet Terry- it accents the roofline......
     
  24. T McG
    Joined: Feb 12, 2005
    Posts: 1,263

    T McG
    Member
    from Phoenix

    Thanks Ken, it actually made it look not as chopped because of the larger window opening. It was a unique effect.
     
  25. v8spence
    Joined: Jul 27, 2004
    Posts: 137

    v8spence
    Member

    Damn, you guys are good!
    This is inspiring me to have a UK roof chop party next year on mine.....
    Our UK Kustoms club have 5 people already with cutting tools waiting to get there mits on my roof!
    lol
    the more pictures the better.
    I think I want to keep the chrome/stainless trim along the door tops and around the back which may/may not help but nothiung must upset this line (the wife says so)....

    email address for pictures buick related......spencer (at) v8ford.co.uk
    cheers,
    Spence
     
  26. Kail
    Joined: Jul 7, 2007
    Posts: 828

    Kail
    Member
    from Austin, TX

    chopping one right now, anyone else knock one of these out since 2006?
     
  27. padorey
    Joined: Jan 20, 2007
    Posts: 282

    padorey
    Member

    Here are some pics of the finished 53 Bick Super. Terry does some fantastic
     
  28. padorey
    Joined: Jan 20, 2007
    Posts: 282

    padorey
    Member

    Here are some pictures of the finished car
     

    Attached Files:

  29. Kail
    Joined: Jul 7, 2007
    Posts: 828

    Kail
    Member
    from Austin, TX

    what was done to the back window? aftermarket cut down, moved, sunk..
     
  30. padorey
    Joined: Jan 20, 2007
    Posts: 282

    padorey
    Member

    The rear window frame was cut out, leaned forwardto meet thecut roof. this left a about a 3 inch gap between window frame and the panel above the trunk. That panel had to bee hand made. Using the stocr original rear glass
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.