1956 Thunderbird drag car project. Was being built specifically to run at the HAMB Drags. Life has just gotten too hectic for us to finish the car. Would love to see it finished by someone and Raced. Has a good ***le. 90% of what's needed to get it race ready is here. Could be made street legal,(have the stuff for the lights etc) Windshield gl*** is good. most of the stainless trim is gone, but have the fender vents, hood scoop piece, head and taillight stuff. Have an original seat. All new brake parts included. Radir slicks on speedway wheels. Monoleaf rear springs, slider brackets, Old school ladder bars, 9" housing(needs narrowed, or not if you want to cut the wheel wells), 9" center with 4:56 gears and a spool, Shocks, front springs, Bushings in the front control arms(was planning on keeping stock front suspension. New aluminum fuel cell New gear reduction starter lots of good used stuff ,Red fuel pump, Hyfire ignition, Tach, Painless wiring, Seats, Harnesses, New roll bar Comes with a 428cj with Edelbrock heads, flat top .060 Pistons, cj rods and crank. C6 with kit and 10" converter. Aluminum radiator Headers Lots of stuff to finish a race car in boxes. If you have a question about details, just ask. If you are serious and need me to, I can get the suspension put together enough to get it rollable.