Technical Parking brake pedal install

Hi all,

I am reinstalling my parking brake on my 64 Galaxie but I seem to be missing parts and I don't have the book.

I know I need a U-clip to hold the cable to the pedal ***embly, but what actually pulls the brake cable? Should there be a clevis like a Chevy? Please see the photos of my pedal ***embly.

Thanks

https://ibb.co/3cGRB2N
https://ibb.co/vwY1ps8
https://ibb.co/rHc01gV

 

Thanks, I couldn't get it to work on my phone.

 

I believe the '60 is the same ***embly and yes, there's supposed to be a clevis that the cable attaches to. My manual has no pics (sorry!) or I'd post them...

 

Will these help, 1964 shop manual and parts books--

 

Thanks a lot. Is that a galaxie? Is the release going through the dash to a knob?

 

That's probably a 'generic' picture, Ford used a dash knob initially then moved the pull to under the dash later.

 

Is the clevis part 2861 like the picture the other person posted?

 

The pic is showing the 1962 setup but it is out of the 64 Galaxie manual. The ***embly is the same, but the release for the 64 comes out under the dash.

 

Yes.

 

Thanks a lot egads and crazy steve!

 

If you can't find the bits, Ford used essentially the same ***embly well into the '70s/early '80s so it shouldn't be hard to come up with the parts.

 

The '59 I have, the release is under the dash. I had 3 '64 Fords but cannot recall how they released. I was able to pick up a new front cable for my '59, the old one was seized up. It was a ****** to get the old one out, a real tight spot to work in.