Anyone have pictures of a c-notch on a 56 f-100?

Going to be c-notching the truck in the next few days and trying to make a plan.
Should I buy some pre-fabb'ed or fab it up?
If anybody has pix of this it be cool.

 

Sorry, gotta bump this back to the top 'cause I know one of you has some pictures. And or some tips.
One of the question i have is- will the frame need any extra support over the top of the notch?

 

I can give you pictures of the stock frame where the c-notch will go...

bttt for a fellow F-100-er.

Ben

 

http://www.johnsonsgarage.com/dicks56f100/

 

not if you box the inside of the frame around the c and use somethng substantial for your notch... I use schedule 40 pipe...

 

I was planning on boxing the inside. Do you have a picture of the inside part of your notch?
I noticed you angled your shocks forward. I've seen so many variations and angles. How does it ride?
I was planning on straight over the axle but angled in a few degrees on the top mounts, and the bottom mounted to the U-bolt plate.

 

Here's how it ended up.

Thanks for all the tips.

 

Looks good to me... so, what does the rest of your truck look like?

Ben