Technical 36 Ford headlight drop

Is there anyone that could do a headlight drop on 36 Ford original headlights

 

There's a 36 build thread and the guy shows how he dropped his headlights.

I can't seem to find it... was a guy in Oz or New Zealand. He had a long build thread. Maybe someone can post it.

Basically he dropped the mounted up into the bucket farther so the buckets were closer to the fender.

 

I think UK ford pilot had smaller headlamp stands which would bring the 36 headlamp down closer to the fender

 

Here is one 'how to':
https://www.jalopyjournal.com/forum...lights-on-a-1935-ford-the-quick-easy.1010836/

 

Whatever happened to Tech o Matic?

Chris

 

Here's how I made dropped headlight pedestals for my 37 Packard. Starting with 1/8" plate for the base and light mount, the filled in with 18ga steel sheet. I fitted 41 Plymouth park lenses for turn signals. Final result is a 3" drop.

 

Here is the drop from New Zealand, about half way down page 15:

https://www.jalopyjournal.com/forum/threads/36dd-my-double-duty-3-window-build.685168/page-15

 

Any ideas where I could find these?

 

'33 -'34 ford cars are shorter, but $

 

I need to see more of this car !!!!!

 

I will see if I can locate any over here and get back to you

 

If there’s anyone out there that can retrieve an obscure thread on any subject faster than @pprather please step up.

 

pilot stalks only work on 35 fords.. 36 headlight mount differently.