Hot Rods Old school way to lower an A

I want to lower my A roadster for now and put my fenders on. This coming winter I'll do an AV8 conversion I have almost everything I need to do that. I'd like to lower it and drive it with the nabger this summer as is. I have a T spring for the rear possibly looking for suggestions To keep everything else stock as it is now,. Txs

 

I did a quicky on this cars suspension one weekend this winter. It was bone stock. I put a T spring in the rear with a couple leaves removed. In the front I installed a 33-36 axle with 32-34 perch pins. Dropped it on some 7.00-16 and 5.50-16 tires and thats that. Its not exactly slammed but its considerably lower than it was

 

4” drop rev eye / T rev eye

 

Model t spring as everyone is going to suggest. Reverse eye spring in the front with a 33 to 36 Ford axel. That’s pretty much the formula I used to build this car

 

33-36 axle with a reverse eye main spring in a 33-36 spring pack ? Thanks

 

You use a 28-34 front spring

 

If your going to run front fenders and use a drop axle you need to use a early V8 axle there narrower then model a from perch hole to hole so tire clear fenders

 

I put a 2" lowered spring on the front of mine and then the tire rake

 

All of the above and small, skinny tires on the front