Technical Signal Stat Sigflare 6 wire set up

Yeah, I know, not again. Sorry guys but I'm stuck. New unit is 100 bucks through NAPA. Money is tight for this old man so's I gotta work with what I have. I have unit that has 6 wires colored gray, green, yellow, red, black and another gray one with a black stripe. I took the cover off and judging from where the wires are positioned on the switch I can guess that the yellow wire is the hot wire and the gray with a stripe must be for 4 way lighting. I just might have a turn signal that was meant for a truck. Your help will be greatly appreciated.

 

many are 7 wire, you have six, did they skip the indicator light on the handle, some did...

 

See if this helps, I had a thread back in 07 about trying to figure mine out.
Edit : that's only a 4 wire

 

I found another thread I had in 12 on another car that should help

https://www.jalopyjournal.com/forum/threads/turn-signal-wiring-rebel-signal-stat-900.679263/

 

Total of 6 wires. Present and accounted for. Thanks.,

 

https://www.jalopyjournal.com/forum/threads/turn-signal-wiring-how-to.869492/