Projects NOT THE TYPICAL '30 ROADSTER BUILD

Agree. I think this one is going to be a keeper for years to come.
As my parents are now getting older ,and depending more and more of me, I find myself enjoying every minute I can with them.

 

The plan was to install the engine and trans this weekend but got delayed since the trans adaptor is at the machine shop getting a hair cut.
More of that here... https://www.jalopyjournal.com/forum...-installation-question.1269068/#post-14545604

I am glad I caught it before installing everything....

In the meantime, I started final prepping the T5.

I bought the Clutch slave cylinder from Krylon32. Man, it fits like...nice and easy




No plans for reverse light, so out with the old and in with the new


Speedo cable showed up. Ready when needed
69" long

 

Your cost ****ysis/breakdown is something that every professional shop would love to have to be able to show potential customers up front just what it takes to build one of these cars. You have done an outstanding job and should be extremely proud of what you have accomplished.

 

Thank you! It is eye opening for sure.
Every step I take forward gets me a lot farther than what I ever imagine ever getting to.

 

Next biggest expense is going to be the interior. I am not ready to start buying materials yet but definitely brainstorming colors.
I think my mind is made...at least, for now


Love that saddle bag color against the blue!


Interior panels, trunk, and seat are going to be done using the Saddle bag leather
Carpet will be square weave Tan with leather t*******.
Top material will be Stayfast Tan Canvas

I am guesstimating $3k-$4k in materials, yikes!!!

 

One step closer to getting the engine in...Yay!
I got the T5 adapter back from Vellios and they did a great a job shaving the inside rim to avoid interference with the pressure plate's counterweights.
I am a fan of good customer service and those guys a great!



I got plenty of clearance now. It shouldn't hit.
Very glad I caught this while researching how to install the engine/adapter/trans.
I can only imagine the mess of taking everything apart to fix it once installed.
Happy I didn't cut the counterweights as suggested by the article I read.





Transmission is ready and bolted to the engine. Everything fits....However, my torque wrench broke and it only spins ****!
I will be picking a new torque wrench tomorrow and finally mating the trans and engine, hopefully, for the last time
I am still on target to installing it in the roadster this Saturday...fingers crossed!

 

Today, was a really good day for me in the garage. On cloud nine moment!
My dad came over around 10am and we just started working and talking about the kids, COVID, new downtown bridge, work...I was mostly listening, he was doing the talking....and out came the old stories, the ones I've heard many times before...When I was your age...back in the days...these days...
I slowed down and I heard him talk, I even asked questions that I already knew the answer to just to keep him talking and engeaged.
Impressive to see how his long time memory is so sharp and vivid but his short time memory, little by little, keeps getting worst :-(
Both my daughters came out to the garage and just sat on the floor and were simply paying attention...I was just happy to see them away from their iPads for more than 10 minutes. I hope memories like these get imprinted on their minds.

Felt like time moved so fast and before we knew it, the engine and transmission were in, right before lunch time.
Nice cold beers in celebration!


I said it before and I will say it again, this thing looks m***ive!!!


There she is. Perhaps, my most expensive investment in this project.
Built by H&H flatheads. It was meant for my '36 truck but sold the truck before installing it.
It finally found it's new home and we put no scratches on the paint....A little dusty from storage but ready to go vroom, vroom!!

 

The best part of the story is how much you and your dad enjoyed the day working together and your girls joined in, memories that will stay with you and your daughters forever!

 

Did you make sure your clutch disc didn’t s****e anything? Regular s10 clutch (for me) interfered with the flywheel bolts I remember; so I had to get the special one from speedway. Its different because it has the center riveted on the trans side of the disc instead of the engine side moving it just far enough away to clear.

 

That's for sure! Capturing every memory along the way.

 

I didn't check the disc :-(
Disc and pressure plate came already installed from H&H so I didn't bothered to check....Hopefully it doesn't come back and bite me...

 

Sometimes the most obvious things are not so obvious...Finally got my fuel stand, baffle and push up rod sorted out and ready to install.
As I installed the fuel pump, I realized the "In" outlet was right up against the firewall. I looked at it for a while and couldn't figure out what was wrong with it.
When I mocked everything up, there were no issues. I clearly remember having plenty of room.
The fuel pump I used for mock up was a gl*** bowl stock unit, the one I am using now is an Offenhauser for multiple carbs. Pretty much the same thing...it shouldn't be this off.
I scratched my head for a while...the one I used for mock up is long gone in the trash. now

Went back to the ****py fuel pump instructions, nothing.
Went on-line and did a search, nothing.
Took a break and started pulling out the parts for the fuel line and there it was. The top part the fuel can be rotated. Dumb, dumb!
I felt like the total rookie that I am Gave me a good laugh.


Out of the box


Rotated to the next screw


Let there be clearance.


At least the GO pedal went in without further drama



Added a little extra color to the fan; maybe now I can see it spinning and don't loose a finger.

 

I like what your doing so far! Good choices on the carpet and seat colors. If you ever meet my wife DO NOT show her your spread sheet! She claims I have spent $50k on my 31 roadster and I claim I am not into it for more than $30k! The discussion ends when I say" I do it because I love working on old cars, I don't do it to make money!" Her reply is "Damn good thing because you aren't!"

 

So how did you know your roadster was a 1930 and not a 1931?

 

LOL! You got it! I won't tell her how much money I spent

 

The instrument panel was a '30 based shape of it, the radiator shell had a smooth top and no painted details, the body number hinted to '30, no indented firewall, body number by the bench seat ...but most important than all, the ***le I had

 

Looking great!! That firewall looks like a mirror. Did I miss some details on the gas pedal cover? Looks like you molded one that sweeps down the firewall. Looks really nice!!

 

I used a '36 pedal, modified to fit the firewall, and made a cover for it.

 

Nicely done!!!

I love your attention to detail!!

 

That's what it takes to really make a period correct car. Really great work

 

Thank you Brian!

 

Thank you!

 

I was planning on an easy evening and getting a couple things done...din't quite worked that way but got them done

First thing was mounting the firewall insulator...literally, must have put it on and off 15 times to measure it, re-measure it, cut, adjust and repeat. I am happy with the outcome. This thing looks nice, good quality product.



Then it was the coil.
Here I am thinking a 2 minute job. 2 screws and then I can finish the wiring.
Well, I never mocked up the coil's position, combined with the breather cap and fuel pump stand. Come to find out they don't like to play together. If I position the coil vertically, in the stock position, there was no way to remove the breather cap/oil filler.

The solution was to mount it horizontally but not before making a bracket to use the stock bolt location.
Using an epoxy filled coil just to make sure I have no issues with a horizontal mount.
I can now remove the oil filler cap with no issues.

 

Coming along nicely , you do nice work. Here is my '30 roadster, looks black but is Washington Blue.

 

Thank you for taking the time to post often an in such detail. Its been a pleasure to read thus-far and to watch your skills improve as you go and watch the mistakes/learnings you are going through. Wish I would be in the garage with you and helping. Looking forward to future posts on this thread for sure.

 

Thanks for continuing to post the costs in time and money for your project. I have yet to build a period inspired hotrod. You have a great perspective on the time with your folks, too. You never know how much time you have left with them. Lost my mom a year ago this month. Miss her everyday. Had the blessing of taking care of her the last few years and cherish every minute of it. I really liked how your kids were also engage. Precious!

 

That roadster looks nice! Really dig those fenders and that Top.
Thanks for sharing

 

Thank you. It has been a great journey. Would do it all over again for sure.

 

Sorry to hear of your loss
That is exactly my fear. Both, mom and dad, are getting older, health is deteriorating, and I find time moving so fast on us.
We are spending a lot of time together, traveling, making it a point to go see them at least every other day, or so.
I am getting my girls to spend as much time as possible with them too. I do want my girls to have good memories of them. At 5 and 12 years old, they are creating their one memories....They are so memorize with all the stories they hear from them. They still can't believe they used and hand crack candlestick phone and worts part they couldn't text or play games with it
Good thing is mom and dad also enjoy so much spending time with the girls. It keeps young, they say.