Technical Jim jacobs sbc generator bracket

I was wondering if anyone had a picture of the sbc generator bracket that Jim jacobs use to make. Any help would be appreciated

 

I think Jake still has some

 

Hey Pete,how would I find out? Got a contact?

 

I'm thinking that Pete is probably your best contact to be able to relay your info.

 

I'll give him a call tomorrow
are you looking for a right side or a left side?
I think he has both.

 

Man I fuckin love this place...

 

Several years ago Walden sold these brackets...

 

Pete, I’m looking for a left mount. D/S if possible. Thank you for all your help.

 

Donut dave,
Unfortunately Walden no longer has them.

 

There's also alan grove

http://www.alangrovecomponents.com/

 

Does this help? Bill

 

Jitney Jakes bracket is set up for a PowerGen alternator . I have one on my engine run stand with a regular alternator. Bill

 

Hi bill. I’m running a power gen.

 

Bill is it set up for a short or long generator

 

Theirs always the DIY ugly but traditional, shade tree, version…

 

Short

 

Thanks bill. Waiting to hear back from Pete. He may have found 1 for me.

 

I run one on our 57 Chevy (passenger side) I have a spare on the wall (drivers side) iirc. If they dont have what you need available send me a pm.. Id part w my spare for whatever it cost me. I bought mine from Waldens several years ago. Worked great w a stock GM generator. It looks just like the unit 48 Stude posted.

 

Does the front leg run down to the WP mounting boss or to a late model head boss?
Thanks!

 

It mounts to the upper water pump bolt. It works with early heads that didn't have bolt holes. Bill

 

Looks genuine traditional 40's-50's hot rod to me!

 

Thanks! Apologies for hooking the thread, @1954FORD. One of those would also work on my 283.
Guess that they’re N/A these days. That leaves Alan Grove, or V.A., which are pretty much the same.

 

Won't do you any good but Roadster Supply has duplicated the right side mount.

 

Here is what I used, unknown year sbc smog pump bracket

 

I would like to buy 2 of them if possible.

 

@Pete Eastwood if he has more I could really use one.
Thanks

 

Hey @nochop does the generator just bolt up and put the pulley in the right place or are their any mods needed.

Also: I was reading your thread about the car this engine was in:

https://www.jalopyjournal.com/forum/threads/blowing-this-thing-apart.1257505/

and notice that it had an alternator on this bracket. Have you used a generator on this bracket on another build to confirm fit?

It sure looks like an awesome option if it is a bolt on.

 

I ran an alternator. I ran a spacer with the through bolt to get alignment

 

Ya know, the design of that smog bracket sure looks like something a guy could copy and make one to fit a generator.

It sure is a simple clean design.

 

I modified an alternator mount kit from www.welderseries.com #WS2392. Used their hard to make pieces and made up the support in the back. They also have a lower mounting kit and one for the passenger side.