Customs Replacement for 1949 Ford Tudor seats

Is there a seat from another vehicle that I would bolt straight into my 49 Ford Tudor? Thank you

 

Probably a 50 Ford?

 

I think a 50 or 51 seat would work but I was hoping there was a newer vehicle that had the same or close to the same bolt pattern. Thank you for your reply

 

Usually working on old cars isn't as lucky as that.

 

Would this help?

https://nwct.craigslist.org/pts/d/goshen-1949-ford-four-door-body-and/7551875236.html

And if that doesn't help you could always fabricate a pair of steel adapters to get the bolts to line up. Your frame has nuts welded to the underside that must be used to mount your seat. I had to move my seats back 4 inches even though the seat came from a shoebox. Scroll down to see what I did here to make it work.

https://49fordcoupe.smugmug.com/The-Interior/i-6fK4xdG

 

A fordor seat wouldn't be any good, it won't tilt forward so the p***engers can get in back.

 

Should be easy enough to make an adapter to fit almost anything. May only need some flat stock.

 

Good point!!!!

 

You might call Roger or Lynne at 620.680.0449 or 620.680.0375..they have some shoeboxes that are being parted out. That's where I got my seats..in Kansas

 

Put an ad in the wanted section here, that's how I found the seat in my 40.

 

Don't know where you're at but these are eastern Iowa.
https://m.facebook.com/marketplace/item/2688961171235617/