Hot Rods Edelbrock dual carb setup fuel inlet - struggle choosing

I’m in the process of putting a dual quad setup together for my Tudor project and am in the same predicament as you. I really don’t like the look of the braided line, but I’m equally not fussy for the plumber look either. Hopefully someone will post a pic of something that will inspire a solution for me. If I figure out something in the meantime, I’ll post a pic.
Kicking around idea of hard lining an old fuel block, but need to find something cool that I don’t mind wrecking.
Cheers.

 

Use a fuel block, bend up some lines and flare the end, don't make this harder than it needs to be.
https://www.oreillyauto.com/shop/b/...anagement/fuel-blocks---aluminum/63582d6f5bb8

 

Carter's, not Edelbrocks, but the same idea. It doesn't have to be straight tubing and br*** tees.

 

I did similar in the past, I love the way your can customize the spacing etc...

Scrounger Tech, S****metal Fuel log. | The H.A.M.B. (jalopyjournal.com)

 

Ding ding. Now we’re cooking.

 

Twin Edelbrocks

 

Simple and effective.

 

I ran this setup for awhile in the J, kinda hard to see but it's push lock AN fittings with black push lock hose, if I find a better photo I'll add it to the post

 

Not a 2x4 but the fuel log idea.

 

Stainless setup on this one.

 

Used to run this setup.

 

This is what I run now, it is just a race car put together with what parts are laying around or can scrounge from a friend. I have used my buffer to take the color off of fittings, wasn't a concern on this one.

 

Very nice work….Does it vibrate much? I added a support tab at the intakes first bolt on mine; aluminum strap about 3/4” wide. Made me feel better.

 

I haven't noticed any vibration but I have been planning on additional support