********Note: A signature upon delivery will be needed on this FedEx shipped item******** For sale vintage used modified Ford C6 empty automatic transmission case for the small block engine series engines (302, 351W, 351C). Casting number = D4OP 7006 BA/D40P 7006 BA It has the Ford "small block" bolt pattern, and the full set of bell housing-to-case strengthening ribs. It uses the push-in style vacuum modulator. It has a case mounted detent spring/wheel assembly, so it's meant for a non-internal detent valve body. But an internal detent style valve body can be used if the case detent spring/wheel is unbolted & removed from this case. This Ford C-6 case is mostly empty except for the rear parking pawl assembly, and a few main shaft bushings. This Ford C-6 case has been modified, modifications include: (A) Drilled & threaded 1/8" pipe thread hole for an internal TransBrake style valve body wire pass-through connector seal fitting. If an internal Trans Brake style valve body isn't going to be used a conventional style valve body can still be used with this C6 case if a 1/8" pipe plug is installed in the TB wire pass-through hole. (B) The bellhousing has been drilled with three (3) holes for increased torque converter cooling & torque converter bolt access. (C) Some of the unused bellhousing ears have been removed for trans tunnel clearance. It has been sitting on the shelf for years, so it needs a good cleaning to remove any remaining dirt/surface rust/paint/etc before rebuilding & install. Asking $425.00 + shipping. Update: asking $347.00 + shipping. This sale only includes the Ford C6 transmission case shown in the above pictures. This sale does not include any other transmission related parts, or any other parts/equipment not shown in the attached pictures. It is the buyer's responsibility to research if this C6 case will fit their engine combo, and to have the knowledge/skill to rebuild & install it correctly. There is no warranty associated with this vintage Ford C6 small block trans case, it is sold "as-is". All sales are final, there are no returns. Notes: (1) Shipping is FedEx (2) The shipping box is 18" long x 18" wide x 22" tall x about 35-37 lbs. (3) The shipping box will be closed with both hot-glue and tape. (4) Shipping is from Kennedale TX - 76060. (5) A signature upon delivery will be needed on this FedEx shipped item. (6) Cash, money order, and PayPal accepted. If paying with a money order the package will be shipped 7 business days after the M/O is deposited in the bank (or after it clears the bank). Any questions private message me. Thanks.