Technical 1935 dodge pickup rear fenders

hello, I am trying to find rear fender measurements original rear fenders 1935 dodge pickup, arch from front to back , center width, height top bottom and length front to back any help would be greatly appreciated, mike

 

If it helps I believe 33,34 and 35 truck rear fenders all the same. That opens up a bigger group of people to help you out

 

I suspect you would have a good chance of finding what you need here.
https://p15-d24.com/

There is a truck section and it is pretty active.
Be aware that because of scammers the board owner has recently turned off guest access.
You will need to join then login before you can read or post there.

 

33-35 pickup rear fenders are the same. They are available in fibergl***, and at one time they were being reproduced in steel, although I haven't seen them advertised lately. I have a 35 pu but I won't be able to get measurements for several days.

 

First series 1935 pickups were still the KC series if I recall correctly (same as 33-34). The second series 1935 pickups were the LC series and included 36' - 38'. The fenders in the 1st and 2nd series are different but the fenders within each of the 2 categories are the same.

 

That sounds good

 

Wait for Dave Wollam on here, he will know.

 

Late '35 had the '36 cab with non suicide doors but the rest looked like '33-'35. That's all I know about that.

Dave