Does anyone have the bolt pattern measured where the transmission bolts to the bellhousing. I gave away my spare bellhousing, and now I'm looking for the bolt pattern I didn't measure when I had the chance. Figures. TIA. Tim
I have a p***enger car bellhouse I can measure, but I don't know if the car and truck transmissions have the same flange.
I’ll try to get you the info if I can remember to do it. A little enticing areound here right now. Just thought about your user name... were you on the 39-47 Dodge trucks site for a long time and originally from Alberta?o
If you mean the Yahoo forums, then yes, that was me. But I've always been in San Diego. I appreciate anyone being able to help.
View attachment 5952014 This is what I've come up with. Take it with a cautious huge grain of salt, as I don't have either the A833 or a loose bell housing to verify any of this. Anyone who does, please chime in. I'm using flathead 7/16-14 bolts to create "studs" to bolt the trans to. The plate has some thread to it. I'd thread lock the bolts, then bolt this to the bell, then trans. But all of that is just in my mind right now. I removed the drawing because the location of the trans to bell bolts was not even close. View attachment 5952010
The Jalopy Journal
