Technical To breathe or not to breathe, that is the question part 2

?After ope it works.

 

Pat, may I buy a vowel?

 

Maybe a consonant ?

Tommy

 

I'm baffled...

 

viewing all your suggestions, this is how I solved the problem. I found an old valve cover and removed the baffle. Then I drilled a 1 inch hole in one valve cover and placed the baffle in my cover using JB liquid weld. A new grommet was installed allowing a pcv valve to be used. Photos included. Not that big a deal-h

 

I tried to post my photos but something went wrong. I'm only using a tablet. That might be the problem. Anyway the problem of using a pcv valve on older valve covers was solved. Thanks for all who responded.

 

Where in the VC did you drill the hole?

 

drilled the back side of the V/C ?

cool idea