Projects Bought a Mercury on purpose

Me likey.

 

Thinking out loud

 

There's really only one real answer here.... LOL

 

Messing with another bumper. Had to do some adjustments

 

SUPER COOL!

 

I like this ugly bumper set up

got to work out a twist on the passenger side

 

Any usable 51 taillights or lenses in HAMB land?

 

Hey, Anthony;
What is that bumper from? Looks almost familiar, but I can't place it.
TIA.
Marcus...

 

The original one we had to straighten from the wreck.
The other bumper donated it’s brackets.
We just about got it straightened.
One small patch for the fender under the headlight and we’re gonna body work and prime the fender and apron.
A small repair on the rear body as well.
Probably straighten the rear bumper in our press next week

the grill was bent and twisted. It’s getting closer as well

 

Oh, and wanted to see what the other, less gaudy bumper looked like.
I guess I’m leaving this one with the ugly bumper.

 

Go with it, I like ugly...

 

Had a rotted spot under the headlight on the damaged fender.
Students made a template then we made a patch

 

Little more finish work and they hit it handled

 

I had a good shop teacher in high school, took it all 4 years and was****istant my senior year, which meant I just goofed off a lot, but there was never anything like this. Is bodywork a separate course?

Devin

 

It’s a collision class.
I sneak in some old cool stuff when it fits.
It’s a 3 year high school course. Unfortunately class time is short. Bout 1.5 hours.
The welding and cutting cycled every 3 years. But a curriculum change will have 2nd year students doing that every year.
This is one of the welding and cutting class projects.

these are pieces that resemble unibody structure. Students prepped them, applied a DTM primer to the inside, a weld thru in the weld area then resistance spot welded them. After that a section was removed (spot welds removed and a slice thru one side) then that section was prepped again and welded back on with a mig.
Demonstrating how to section body panels.

 

First year refinishing students

 

First year students.

it’s not perfect. Students had some sand scratches they missed. I knew they were there. Now they know what to look for and why.
Gotta learn somehow.
Single stage enamel

 

I envy the hell out of these kids and what you are teaching them. Sure wish I had someone like you when I was a kid.

 

Previous owner beat the***** out of a dent with a claw hammer



got a new 4.5 inch shrink disc

getting used to the smaller disc. It feels different than the large ones.

Students made good progress with it.
Should be almost filler free when done

 

These hubcaps popped up. 15s look kinda cool

might pull the trigger

 

Since we’re fixing the major dents on the merc I’ve considered shaving handles.
I do like the Lincoln push*****on. The merc only has the one drivers door lock anyway. Could leave it.
But probably only use em on the front doors. Considering solenoids.
I’ve installed a pair of the Lincoln’s from @CoolHand in the past. Worked out nice.
Go flush or no? Hmmmmmm
I’ll dig thru my junk pile and see if I still have some cable style latches for the trunk.

 

Those hubcaps are neat, but I wonder how deep your wheel needs to be for them to seat? That base cap looks really familiar, I'm trying to place it. I know I've had issues with hubcaps that wouldn't fit on certain steel wheels because the caps would bottom out on the center of the wheel before seating on the outer rim.

If they're local, I'd bring one of your intended wheels over and snap it on first, to make sure they'll go.

 

Mine has OE merc wheels. A regular caddy sombrero fits with the dog dish looking mount removed. Looks like these mount on the outer rim instead of like the other ones I have.

Internet pic
This HAMB pic has them on a standard Chevy wheel

 

Acquired a truck load of old transmission junk. There was a very nice Chevy FW with the Borg and Beck bolt pattern

SBC FW with the merc clutch.
The merc input has some wear on it

need a new pilot bushing for the adapter. No big deal.

the pile of transmission parts should yield 2 gm OD 3 speeds.
One Muncie and one Saginaw.
Also had a new pressure plate and disc for a gm trans in the parts pile.
I’ve got a bell bor both small and large gm FW.
Was kinda thinking about using a gm trans. It’s already set up for the Merc trans. Would have to add a slave cyl set up and handle the drive shaft.
Hmmmmmmm

 

The larger shrink disc works better

 

Uh oh

 

Were those OEM on any car or are they aftermarket?

 

Looks like a nice set!

 

Not sure
Washed em off.
Estate sale
15s. Not perfect.
Fine for me

 

I'm sure I'll get corrected if I'm wrong, but I believe the Saturn was only on true Olds hubcaps. I'd run them!